3D Printing of Tungstate Anion Modulated 1T‐MoS2 Composite Cathodes for High‐Performance Lithium–Sulfur Batteries
Authors:
- 10 July 2024
- journal article
- research article
- Published by Wiley in Advanced Energy Materials
- Vol. 14 (39)
Abstract
Lithium–sulfur (Li–S) batteries can offer high capacity and energy‐density, but face challenges like low conductivity, lithium polysulfides (LiPSs) shuttling, and limited reaction kinetics. In this study, the electronic configuration of Mo 4d orbital in MoS2 is modulated through a one‐step method involving tungstate anion (WO42−) modulation to form a stable 1T‐MoS2/carbon composite (1T‐W‐MoS2/C). When WO42− is introduced, it causes a transfer of electrons to Mo in 2H‐MoS2, resulting in the generation of a stable 1T phase. In the composite, 1T‐MoS2 nanosheets exhibit remarkable electronic conductivity, hydrophilicity, and catalytic activity, facilitating the LiPSs adsorption and Li+ transport. Meanwhile, the WO42− modulation can create abundant adsorption/catalytic sites with defects on the basal surface and edges of MoS2, facilitating the efficient catalysis of LiPSs conversion. Furthermore, the 3D‐printed electrodes without utilization of binders and current collectors can ensure high mass loading and promote ion diffusion and electrolyte penetration. Theoretical and experimental results confirm that 1T‐W‐MoS2/C can catalyze LiPSs conversion, suppress LiPSs shuttling, and enhance sulfur reaction kinetics. Therefore, the 3D‐printed 1T‐W‐MoS2/C/S cathode exhibits a high initial capacity and excellent rate capability, achieving an areal capacity of 7.37 mAh cm−2 with a sulfur loading of 8.89 mg cm−2.Keywords
Funding Information
- National Natural Science Foundation of China (52203340)
- Natural Science Foundation of Hubei Province (2022CFB596)
This publication has 58 references indexed in Scilit:
- Development of Synergistically Efficient Ni–Co Pair Catalytic Sites for Enhanced Polysulfide Conversion in Lithium–Sulfur BatteriesAdvanced Functional Materials, 2024
- Combined Defect and Heterojunction Engineering in ZnTe/CoTe2@NC Sulfur Hosts Toward Robust Lithium–Sulfur BatteriesAdvanced Functional Materials, 2023
- Small Molecules, Great Powers: Chemistry of Small Organo‐Chalcogenide Molecules in Rechargeable Li‐Sulfur BatteriesAdvanced Functional Materials, 2023
- Crystallinity Regulated Functional Separator Based on Bimetallic NixFey Alloy Nanoparticles for Facilitated Redox Kinetics of Lithium–Sulfur BatteriesAdvanced Functional Materials, 2022
- High Mass Loading 3D‐Printed Sodium‐Ion Hybrid CapacitorsAdvanced Functional Materials, 2022
- P‐Doped NiTe2 with Te‐Vacancies in Lithium–Sulfur Batteries Prevents Shuttling and Promotes Polysulfide ConversionAdvanced Materials, 2022
- Radial Pores in Nitrogen/Oxygen Dual‐Doped Carbon Nanospheres Anode Boost High‐Power and Ultrastable Potassium‐Ion BatteriesAdvanced Functional Materials, 2021
- Tetrabutylammonium‐Intercalated 1T‐MoS2 Nanosheets with Expanded Interlayer Spacing Vertically Coupled on 2D Delaminated MXene for High‐Performance Lithium‐Ion CapacitorsAdvanced Functional Materials, 2021
- Re Doping in 2D Transition Metal Dichalcogenides as a New Route to Tailor Structural Phases and Induced MagnetismAdvanced Materials, 2017
- Plasmonic Hot Electron Induced Structural Phase Transition in a MoS2 MonolayerAdvanced Materials, 2014