High-cycle fatigue behavior of beta-titanium orthodontic wires
- 1 January 2015
- journal article
- Published by Japanese Society for Dental Materials and Devices in Dental Materials Journal
- Vol. 34 (2) , 189-195
Abstract
This study investigated high-cycle fatigue behavior in three β-Ti wires (TMA, Resolve, Gummetal). Fatigue was evaluated using a static three-point bending test and a high-cycle fatigue test with a three-point bending mode. The surfaces of fractured wires were observed with scanning electron microscopy, and the post-fatigue crystal structures were determined by micro-X-ray diffraction. The Gummetal wire exhibited the lowest elastic modulus, bending strength and fatigue limit, and exhibited the highest resilience of the three types of wire studied. However, no difference in the number of cycles to failure was observed among the three types of wire. The fatigue crack propagation and rapid propagation regions of all wires contained single-phase β-Ti. The elastic modulus and bending strength influenced the fatigue limit, although these properties did not affect the number of cycles to fracture. The three types of β-Ti wires exhibited similar risks of wire fracture.Keywords
This publication has 16 references indexed in Scilit:
- Cyclic fatigue testing of denture teeth for bulk fractureDental Materials, 2013
- Comparisons of nanoindentation, 3-point bending, and tension tests for orthodontic wiresAmerican Journal of Orthodontics and Dentofacial Orthopedics, 2011
- Nanoindentation of orthodontic archwires: The effect of decontamination and clinical use on hardness, elastic modulus and surface roughnessDental Materials, 2009
- Microstructural effects on the mechanical behavior of B-modified Ti–6Al–4V alloysActa Materialia, 2007
- A comparison of the fatigue behavior of cast Ti–7.5Mo with c.p. titanium, Ti–6Al–4V and Ti–13Nb–13Zr alloysBiomaterials, 2005
- Fatigue performance and cyto-toxicity of low rigidity titanium alloy, Ti–29Nb–13Ta–4.6ZrBiomaterials, 2003
- AN INVESTIGATION OF THE EFFECTS OF STRESS RATIO AND CRACK CLOSURE ON THE MICROMECHANISMS OF FATIGUE CRACK GROWTH IN Ti-6Al-4VActa Materialia, 1997
- Mechanical properties and clinical applications of orthodontic wiresAmerican Journal of Orthodontics and Dentofacial Orthopedics, 1989
- Comparison of bending and tension tests for orthodontic wiresAmerican Journal of Orthodontics, 1986
- Beta titanium: A new orthodontic alloyAmerican Journal of Orthodontics, 1980