Active inductor shunt peaking in high-speed VCSEL driver design

Authors:
  • FLFu-Tian Liang
    Fu-Tian Liang
  • GDGong Datao
    Gong Datao
  • HSHou Suen
    Hou Suen
  • LCLiu Chonghan
    Liu Chonghan
  • LTLiu Tiankuan
    Liu Tiankuan
  • SDSu Da-Shung
    Su Da-Shung
  • TPTeng Ping-Kun
    Teng Ping-Kun
  • XAXiang Annie
    Xiang Annie
  • YJYe Jingbo
    Ye Jingbo
  • GJGe Jin
    Ge Jin

Abstract
An all-transistor active-inductor shunt-peaking structure has been used in a prototype of 8 Gbps highspeed VCSEL driver which is designed for the optical link in ATLAS liquid Argon calorimeter upgrade. The VCSEL driver is fabricated in a commercial 0.25 μm Silicon-on-Sapphire(SoS) CMOS process for radiation tolerant purpose.The all-transistor active-inductor shunt-peaking is used to overcome the bandwidth limitation from the CMOS process. The peaking structure has the same peaking efect as the passive one, but takes a small area, does not need linear resistors and can overcome the process variation by adjust the peaking strength via an external control. The design has been taped out, and the prototype has been proven by the preliminary electrical test results and bit error ratio test results. The driver achieves 8 Gbps data rate as simulated with the peaking. We present the all-transistor active-inductor shunt-peaking structure, simulation and test results in this paper.
All Related Versions

This publication has 1 reference indexed in Scilit: