A Brief Review on Fabrication of Screen-Printed Carbon Electrode: Materials and Techniques
Authors:
Open Access
- 12 January 2021
- journal article
- review article
- Published by Universitas Pattimura in Indonesian Journal of Chemical Research
- Vol. 8 (3) , 210-218
Abstract
Screen-printed carbon electrode (SPCE) is one of the most interesting designs to combine a working (from carbon based material), reference, and counter electrode in a single-printed substrate. SPCE has been used in many electrochemical measurements due to its advantages for analysis in microscale. This paper summarises the main information about SPCE fabrication from the material and fabrication technique aspect on the flat substrate based on the work that has been published in the last 30 years. The success of SPCE fabrication is highly dependent on the composition of conductive ink which consists of conductive materials, binder, and solvents; substrate; and fabrication techniques. Among the carbon-based materials, the most widely used for SPCE fabrications are graphite, graphene, and carbon nanotubes. The frequent binder used are polymer-based materials such as polystyrene, polyaniline, poly 3,4-ethylenedioxythiophene:polystyrene sulfonate (PEDOT:PSS), and polyvinyl chloride. The solvents used for SPCE fabrication are varied including water and various organic solvents. The main characteristics of the SPCE substrate should be inert in order to avoid any interferences during electrochemical measurements. The screen printing and inkjet printing technique are preferred for SPCE fabrication due to easy fabrication and the possibility for mass production of SPCE.Keywords
This publication has 41 references indexed in Scilit:
- Inkjet-printed electrochemically reduced graphene oxide microelectrode as a platform for HT-2 mycotoxin immunoenzymatic biosensingBiosensors and Bioelectronics, 2020
- Inkjet printing of particle-free silver conductive ink with low sintering temperature on flexible substratesChemical Physics Letters, 2019
- Simple approach for the fabrication of screen-printed carbon-based electrode for amperometric detection on microchip electrophoresisAnalytica Chimica Acta, 2017
- All-printed humidity sensor based on graphene/methyl-red composite with high sensitivityCarbon, 2016
- The simultaneous determination of isoproturon and carbendazim pesticides by single drop analysis using a graphene-based electrochemical sensorJournal of Electroanalytical Chemistry, 2014
- Large scale inkjet-printing of carbon nanotubes electrodes for antioxidant assays in blood bagsJournal of Electroanalytical Chemistry, 2014
- Disposable paper-based electrochemical sensor utilizing inkjet-printed Polyaniline modified screen-printed carbon electrode for Ascorbic acid detectionJournal of Electroanalytical Chemistry, 2012
- Characterization and fabrication of disposable screen printed microelectrodesElectrochemistry Communications, 2009
- Biocompatible carbon-based screen-printed electrodes for the electrochemical detection of nitric oxideElectrochemistry Communications, 2006
- An amperometric glucose biosensor prototype fabricated by thermal inkjet printingBiosensors and Bioelectronics, 2005