Experimental Investigation of the Effect of Flow Arrangements on the Performance of a Micro-Channel Heat Sink
Authors:
- 15 June 2011
- journal article
- research article
- Published by Taylor & Francis in Experimental Heat Transfer
- Vol. 24 (3) , 215-233
Abstract
An experimental study is carried out to investigate the effect of entrance and exit conditions that prevail due to different flow arrangements on the thermal performance of a copper micro-channel heat sink. Three flow arrangements—U-type, S-type, and P-type—were considered for the analysis with a test piece having inlet and outlet plenum dimensions of 10 mm × 30 mm × 2.5 mm with an array of parallel micro-channels having an individual width of 330 μm and a uniform channel depth of 2.5 mm. Performance evaluations for different flow conditions at inlet and outlet plenums were made by maintaining constant heat supply at 125 W, 225 W, and 375 W with varying Reynolds number ranging from 224 to 1,121. Nusselt number and pressure drop were computed by measuring temperature difference and pressure drop across the inlet and outlet plenum for various test combinations. Maximum heat transfer was observed for the U-type flow arrangement, followed by the P-type and S-type; maximum pressure drop was noted for the S-type flow arrangement, followed by the U-type and P-type arrangements for a constant Reynolds number. A detailed analysis of the experimental results indicate that from a pressure drop point of view, the P-type flow arrangement is preferred, whereas from the heat transfer point of view, the U-type is found to be a better option.Keywords
This publication has 22 references indexed in Scilit:
- A novel high performance, ultra thin heat sink for electronicsInternational Journal of Heat and Fluid Flow, 2010
- An experimental and numerical study of forced convection in a microchannel with negligible axial heat conductionInternational Journal of Heat and Mass Transfer, 2009
- Friction factor and heat transfer in multiple microchannels with uniform flow distributionInternational Journal of Heat and Mass Transfer, 2008
- Thermally developing flow and heat transfer in rectangular microchannels of different aspect ratiosInternational Journal of Heat and Mass Transfer, 2006
- Fluid flow in micro-channelsInternational Journal of Heat and Mass Transfer, 2005
- Investigation of heat transfer in rectangular microchannelsInternational Journal of Heat and Mass Transfer, 2005
- Effect of axial conduction on the heat transfer in micro-channelsInternational Journal of Heat and Mass Transfer, 2004
- Analysis of three-dimensional heat transfer in micro-channel heat sinksInternational Journal of Heat and Mass Transfer, 2002
- Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sinkInternational Journal of Heat and Mass Transfer, 2002
- Flow characteristics of water in microtubesInternational Journal of Heat and Fluid Flow, 1999