Development of a Nanohandling Robot Station for Nanocharacterization by an AFM Probe
Authors:
- 1 June 2006
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Abstract
Current research work on the development of an nanohandling station using the probe of an atomic force microscope (AFM) as an end-effector is presented. The manipulation of individual multiwall-nanotubes (MWNTs) and the characterization of eukaryotic cells are aspired applications. For this reason, the station has to be flexible enough to be integrated both into a scanning electron microscope (SEM) for the nanomanipulation of carbon nanotubes (CNTs) and into an optical microscope for the cell characterization. Another implemented application in the SEM is the characterization of nanofilms by nanoindentation. The experimental setup consists out of a nanopositioning piezo sample stage with three degrees of freedom (DoF) and a three-axes nanomanipulator. Piezoresistive AFM probes are applied as an end-effector. This way the acting forces can be detected allowing force feedback for the station's control system. First investigations have been carried out by bending of MWNTs and calculating the elastic modulus of a MWNTKeywords
This publication has 16 references indexed in Scilit:
- Versatile force–feedback manipulator for nanotechnology applicationsReview of Scientific Instruments, 2005
- MICRON: Small Autonomous Robot for Cell Manipulation Applications2005
- Numerical simulation for bending modulus of carbon nanotubes and some explanations for experimentComposites Part B: Engineering, 2004
- Study on biological effect of La 3+ on Escherichia coli by atomic force microscopyJournal of Inorganic Biochemistry, 2004
- Review of instrumented indentationJournal of Research of the National Institute of Standards and Technology, 2003
- Controlled placement of an individual carbon nanotube onto a microelectromechanical structureApplied Physics Letters, 2002
- Detection and localization of individual antibody-antigen recognition events by atomic force microscopy.Proceedings of the National Academy of Sciences, 1996
- A nondestructive method for determining the spring constant of cantilevers for scanning force microscopyReview of Scientific Instruments, 1993
- Helical microtubules of graphitic carbonNature, 1991
- The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profileInternational Journal of Engineering Science, 1965