A Platform for Outdoor Real-Time Characterization of Photovoltaic Technologies
Open Access
Abstract
In recent years, thin-film and organic photovoltaic (OPV) technologies have been increasingly used as alternatives to conventional technologies due to their low weight, portability, and ease of installation. Outdoor characterization studies allow knowing the real performances of these photovoltaic (PV) technologies in different environmental conditions. Therefore, to address the above, this article presents the hardware–software design and implementation of an integrated and scalable platform for performing the outdoor real-time characterization of modern PV/OPV technologies located at different altitudes. The platform allows knowing the outdoor performance of PV/OPV technologies in real environmental conditions by acquiring data from different monitoring stations located at different altitudes. The proposed platform allows characterizing solar panels and mini-modules and acquiring relevant information to analyze power generation capacity and efficiency. Furthermore, other devices for new PV technologies characterization can be easily added, achieving a scale-up of the platform. A preliminary study of the outdoor performance of emerging PV/OPV technologies was carried out at three different altitudes in a tropical climate region. From the results, the copper indium gallium selenide (CIGS) technology presents the best outdoor performance with an average PCE of 9.64%; the OPV technology has the best behavior at high temperatures with a voltage loss rate of 0.0206 V/°C; and the cadmium telluride (CdTe) technology is the most affected by temperature, with a voltage loss rate of 0.0803 V/°C.Keywords
Funding Information
- Fondo CTeI—Sistema General de Regalías (BPIN-2018000100092)
This publication has 27 references indexed in Scilit:
- Fault detection and monitoring systems for photovoltaic installations: A reviewRenewable and Sustainable Energy Reviews, 2018
- Electrical characterization and comparison of CIGS solar cells made with different structures and fabrication techniquesSolar Energy Materials and Solar Cells, 2018
- Outdoor Direct STC Performance Measurement of PV Modules Based on a Sun-Shading TechniqueIEEE Journal of Photovoltaics, 2017
- Outdoor performance analysis of different PV panel typesRenewable and Sustainable Energy Reviews, 2017
- Monitoring system for photovoltaic plants: A reviewRenewable and Sustainable Energy Reviews, 2017
- Photovoltaic Energy Variations Due to Roofing ChoiceProcedia Engineering, 2016
- Thin film solar technologies: a review2015
- Comparison of different physical models for PV power output predictionSolar Energy, 2015
- Temperature Dependent Photovoltaic (PV) Efficiency and Its Effect on PV Production in the World – A ReviewEnergy Procedia, 2013
- 19·9%‐efficient ZnO/CdS/CuInGaSe2 solar cell with 81·2% fill factorProgress in Photovoltaics: Research and Applications, 2008