Numerical Analysis and Optimization of Lobe-Type Magnetic Shielding in a 334 MVA Single-Phase Auto-Transformer
- 2 December 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 50 (11) , 1-4
Abstract
In this paper, the influences of the lobe-type magnetic shielding in a transformer in terms of its leakage fields, stray losses in structural parts, shielding losses, and short-circuit impedance are examined using 3-D non-linear frequency-domain finite element method. An ODFS-334 MVA/500 kV single-phase auto-transformer is used as the prototype model under study. The magnetic shielding geometry of the transformer is optimized with its stray losses minimized based on 3-D non-linear finite element analysis. To validate the feasibility of the proposed model and method, experimental data and simulation results are compared and reported.Keywords
This publication has 9 references indexed in Scilit:
- 3-D Finite Element Modeling and Validation of Power Frequency Multishielding EffectIEEE Transactions on Magnetics, 2012
- Computation of 3-D Magnetic Leakage Field and Stray Losses in Large Power TransformerIEEE Transactions on Magnetics, 2012
- Loss Calculation of Reactor Connected to Inverter Power Supply Taking Account of Eddy Currents in Laminated Steel CoreIEEE Transactions on Magnetics, 2009
- Calculation of Eddy Current Field in the Ascending Flange for the Bushings and Tank Wall of a Large Power TransformerIEEE Transactions on Magnetics, 2008
- Eddy Current and Loss Analysis of Multisteel Configuration and ValidationIEEE Transactions on Magnetics, 2007
- FEM analysis of eddy current losses in nonlinear laminated iron coresIEEE Transactions on Magnetics, 2005
- Numerical Simulation of Transient Force and Eddy Current Loss in a 720-MVA Power TransformerIEEE Transactions on Magnetics, 2004
- Transient simulation of power transformers using 3D finite element model coupled to electric circuit equationsIEEE Transactions on Magnetics, 2000
- A 3-D finite-element computation of eddy currents and losses in laminated iron cores allowing for electric and magnetic anisotropyIEEE Transactions on Magnetics, 1995