Advances in traceable calibration of cylinder pressure transducers
Open Access
- 9 June 2020
- journal article
- research article
- Published by IOP Publishing in Metrologia
- Vol. 57 (4) , 045006
Abstract
Accurate and reliable dynamic pressure measurements are needed for optimizing performance in modern combustion engines, manufacturing processes and aerospace applications. Besides fast pressure transients, these applications subject dynamic pressure transducers to elevated temperatures. Both of these quantities effect the sensitivity of transducers. Therefore, transducers should be calibrated at conditions that corresponds to the operating environment. To answer these needs, the National Metrology Institute VTT MIKES has developed its drop weight dynamic pressure primary standard further. Developments include improved control and measurement of the falling weight, extension of the pressure range to combustion engine pressures down to 3 MPa and a heating option for dynamic pressure transducers under calibration. These advances enable traceable calibration of cylinder pressure transducers at conditions relevant to engine applications. The overall uncertainty (k = 2) of calibration is estimated to be around 1.7%. The performance was demonstrated by calibrating a piezoelectric pressure transducer in the pressure and temperature range from 7 MPa to 30 MPa in 20 °C, 120 °C and 180 °C, respectively. As a result, traceable calibrations of dynamic pressure transducers can be performed at conditions relevant for engine applications. This improves the reliability and accuracy of in-cylinder pressure measurements.Keywords
Funding Information
- Horizon 2020 Framework Programme (Research and innovation programme)
This publication has 16 references indexed in Scilit:
- Dynamic pressure sensitivity determination with Mach number methodMeasurement Science and Technology, 2018
- A calculation and uncertainty evaluation method for the effective area of a piston rod used in quasi-static pressure calibrationMeasurement Science and Technology, 2018
- Development of a primary standard for dynamic pressure based on drop weight method covering a range of 10 MPa–400 MPaMetrologia, 2018
- Mechanism and selectivity of rhodium‐catalyzed C-H bond arylation of indolesInternational Journal of Quantum Chemistry, 2017
- Towards a standard for the dynamic measurement of pressure based on laser absorption spectroscopyMetrologia, 2016
- A Study of Bulk Modulus, Entrained Air, and Dynamic Pressure Measurements in LiquidsJournal of Engineering for Gas Turbines and Power, 2016
- Dynamic calibration of piezoelectric transducers for ballistic high-pressure measurementInternational Journal of Metrology and Quality Engineering, 2016
- Characterization of a fiber-optic pressure sensor in a shock tube system for dynamic calibrationsMetrologia, 2014
- High dynamic pressure standard based on the density change of the step pressure generatorMetrologia, 2013
- Method for correcting the effect of the inertial mass on dynamic force measurementsMeasurement Science and Technology, 2007