Study on the strength characteristics and micro-mechanism of modified solidified red mud
Authors:
Open Access
- 14 August 2024
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 11, 1461198
Abstract
The residue generated during the production process of alumina, known as red mud, is a type of solid waste. The engineering properties of red mud can be significantly enhanced through the modification and solidification using inorganic materials. This study primarily utilized red mud as the raw material, supplemented with fly ash, lime, and clay, to conduct a solidification experiment of red mud. Orthogonal tests with three factors of two ash ratio (ratio of lime to fly ash), two ash content (total lime and fly ash), and red mud types were designed to study the changes of different ratios and maintenance conditions, etc., on the engineering properties of red mud. In addition, the micro-mechanisms of modified red mud were investigated by means of XRF, XRD, SEM and EDX. The results show that for optimum moisture content, red mud types are the most important influencing factor and for maximum dry density, two ash content is the most important influencing factor. For strength characteristics, the optimum two ash ratio was 1.5:1, the optimum two ash content was 50%, and the optimum red mud types were 70% CRM (red mud made of Chalco Shandong Co., Ltd) mixed with 30% clay. The addition of lime, fly ash, and clay improves the temperature shrinkage coefficient of the red mud. Through the analysis of microscopic composition and structure, it can be seen that goethite (α-FeO(OH)) and magnetite (γ-Fe2O3) in the red mud reacted with the modified materials to generate crystalline aluminosilicate and amorphous hydrated silicate gel, and these products together with the original calcium carbonate (CaCO3), tricalcium aluminate (Ca3Al2O6) and garnet (Ca3TiFeSi3O12) in the red mud which have certain strengths enhance the structural strength of the modified red mud. The optimum ratio obtained from the combined test results was lime: fly ash: CRM = 30:20:50. Therefore, using lime, fly ash and clay as modified materials can greatly enhance the engineering properties of red mud and realise the resourceful use of red mud.Keywords
This publication has 26 references indexed in Scilit:
- Differing perspectives on the use of high-content SBS polymer-modified bitumenConstruction and Building Materials, 2023
- Study on occurrence form and solidification mechanism of alkaline components in red mudJournal of Material Cycles and Waste Management, 2023
- Micro-chemomechanical properties of red mud binder and its effect on concreteComposites Part B: Engineering, 2023
- Strength development and microstructure of sustainable geopolymers made from alkali-activated ground granulated blast-furnace slag, calcium carbide residue, and red mudConstruction and Building Materials, 2022
- Improving the A/S ratio of pretreated coal fly ash by a two-stage roasting for Bayer alumina productionFuel, 2022
- Solidification/stabilization of chromium slag in red mud-based geopolymerConstruction and Building Materials, 2022
- Sustainable use of red mud in ultra-high performance concrete (UHPC): Design and performance evaluationCement and Concrete Composites, 2021
- Utilization of waste from alumina industry to produce sustainable cement-based materialsConstruction and Building Materials, 2019
- Effects of red mud on properties of self-compacting mortarJournal of Cleaner Production, 2016
- Utilization of red mud derived from bauxite in self-compacting concreteJournal of Cleaner Production, 2016