Thermal and structural effects of poly(vinyl chloride)/(wood flour) compound gelation in the Brabender mixer
- 21 October 2011
- journal article
- research article
- Published by Wiley in Journal of Vinyl and Additive Technology
- Vol. 17 (4) , 239-244
Abstract
The processing of two unplasticized compounds of poly(vinyl chloride) (PVC) with and without wood flour (WF) was performed in a Brabender mixing chamber, at various chamber temperatures between 130 and 200°C and at a shear rate of 12.61 s −1 . The test was carried out up to the time corresponding to the equilibrium state of the torque, and the variations of torque and real melt temperature as functions of time were analyzed. It was found that the addition of WF led to fusion at lower chamber temperature and that during gelation, stronger self‐heating effects occurred in the WF‐filled PVC compound. Various characteristics of the real temperature gelation curves of PVC with and without the WF filler were observed and are discussed. J. VINYL ADDIT. TECHNOL., 2011. © 2011 Society of Plastics EngineersKeywords
This publication has 28 references indexed in Scilit:
- Comparison of nanocomposites based on nylon 6 and nylon 66Polymer, 2004
- Effect of the addition of chemical blowing agents on the processability of a rigid PVC compoundInternational Journal of Polymeric Materials and Polymeric Biomaterials, 2003
- Fusion mechanism in rigid PVCJournal of Vinyl and Additive Technology, 2002
- Viscosity effects in rigid PVCJournal of Vinyl and Additive Technology, 2000
- New developments in melt rheology aid formulating rigid vinyl compounds with improved extrusion processingJournal of Vinyl and Additive Technology, 1996
- Studies of rigid poly(vinyl chloride) (PVC) compounds. II. Determination of the fusion levelJournal of Applied Polymer Science, 1995
- Electron microscopy and plastic processing I. Effect of lubricants in formulationJournal of Vinyl and Additive Technology, 1984
- Influence of acrylic processing aids on the rheology and structure of polyvinyl chloridePure and Applied Chemistry, 1983
- Use of acetone in determining poly(vinyl chloride) processing morphology and product morphologyJournal of Macromolecular Science, Part B, 1981
- The influence of stabilizers on the fusion of rigid poly(vinyl chloride)Polymer Engineering & Science, 1974