Heat-Resistant Carbon Fiber Reinforced Plastics Based on a Copolymer of Bisphthalonitriles and Bisbenzonitrile
Authors:
- 1 September 2020
- journal article
- review article
- Published by Pleiades Publishing Ltd in Polymer Science, Series C
- Vol. 62 (2) , 172-182
Abstract
New phthalonitrile resins that provide processing properties at the level of epoxy resins and composites obtained from them are discussed. The processing parameters of the resins are improved due to the discovery of reactive diluents based on bisbenzonitriles. By introducing these comonomers into the resin composition the melt viscosity is reduced to less than 100 MPa s at a temperature of 120°C, which allows one to obtain carbon fibers by modern injection techniques. The curing programs of the composite are selected in order to attain the maximum compressive strength (852 MPa). Carbon fiber reinforced plastics postcured at 375°C retain up to 90% of their mechanical properties at 400°C (τ12 = 60–80 MPa). It is first shown that prepregs can be produced from phthalonitrile resins using the melt technology and composites from them can be obtained by hot pressing. Carbon fibers possess high limiting oxygen index values (LOI > 80%). Thus, phthalonitrile resins and prepregs are developed for non-autoclave processing of carbon and glass composites suitable for operation at elevated temperatures.Keywords
This publication has 39 references indexed in Scilit:
- Self‐catalyzed silicon‐containing phthalonitrile resins with low melting point, excellent solubility and thermal stabilityJournal of Applied Polymer Science, 2014
- Improved synthesis of oligomeric phthalonitriles and studies designed for low temperature cureJournal of Polymer Science Part A: Polymer Chemistry, 2014
- Mechanical and thermal enhancements of benzoxazine‐based GF composite laminated by in situ reaction with carboxyl functionalized CNTsJournal of Applied Polymer Science, 2013
- Synthesis and properties of a new crosslinkable polymer containing benzoxazine moiety in the main chainPolymer, 2006
- Low-melting Phthalonitrile Oligomers: Preparation, Polymerization and Polymer PropertiesHigh Performance Polymers, 2006
- Addition polyimides2005
- High temperature resorcinol-based phthalonitrile polymerPolymer, 2005
- Development of an oligomeric cyanate ester resin with enhanced processabilityJournal of Materials Chemistry, 2005
- The effect of curing additive on the mechanical properties of phthalonitrile‐carbon fiber compositesPolymer Composites, 2004
- Phthalonitrile‐carbon fiber compositesPolymer Composites, 1996