Evaluation of heat transfer modeling using RANS based CFD with application to fuel elements with involute plates
Authors:
- Cezary BojanowskiCBCezary Bojanowski
- Ronja SchöneckerRSRonja Schönecker
- Kaltrina ShehuKSKaltrina Shehu
- Marta SitekMSMarta Sitek
- Yiqi YuYYYiqi Yu
- Aurélien BergeronABAurélien Bergeron
- Christian ReiterCRChristian Reiter
- Jeremy R. LichtJLJeremy R. Licht
Preprint
- 12 August 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
The conversion of high-performance research reactors (HPRRs) from highly enriched uranium (HEU) to low-enriched uranium (LEU) fuel aims to preserve experimental capability and operational safety while reducing proliferation risk. For HPRRs with involute-shaped fuel plates, meeting these objectives often requires modifications to the fuel-plate geometry and careful thermal-hydraulic evaluation due to narrow coolant channels and high heat fluxes.Computational fluid dynamics (CFD) codes—such as STAR-CCM+, ANSYS CFX, and COMSOL—are increasingly used to assess candidate LEU fuel element designs under these conditions. Previous work showed that these codes provide consistent cladding-to-coolant heat transfer predictions over relevant operating conditions using common RANS turbulence models, including k-ε and k-ω SST, and validated the predictions against a limited experimental dataset. Building on that foundation, the present work benchmarks CFD predictions obtained under fully developed flow conditions using realizable k-ε, k-ω SST, and Reynolds stress transport turbulence models against established heat transfer correlations, including Gnielinski and Sieder–Tate, to provide a quantitative comparison with expectations derived from experimental datasets.Across the cases examined, wall-function (high-y+) near-wall treatments produced smaller and more consistent deviations from correlation predictions than fully resolved (low-y+) approaches; for the wall-function cases, 90% of the CFD results were within ±10% of the Gnielinski correlation. These findings support wall-function modeling as a practical and reliable option for thermal-hydraulic analyses of HPRRs with involute-shaped fuel plates and other research reactors with compact core designs.Keywords
This publication has 13 references indexed in Scilit:
- A Low-Enriched Uranium (LEU) option for the conversion of FRM IIAnnals of Nuclear Energy, 2022
- Involute Working Group – Validation of CFD Turbulence Models for Steady-State Safety Analysis of Corner Geometry2021
- Assessment of thermal–hydraulic correlations for narrow rectangular channels with high heat flux and coolant velocityInternational Journal of Heat and Mass Transfer, 2016
- DNS of turbulent heat transfer in a channel flow with a high spatial resolutionInternational Journal of Heat and Fluid Flow, 2009
- Elliptic blending model: A new near-wall Reynolds-stress turbulence closurePhysics of Fluids, 2002
- Turbulent Prandtl Number—Where Are We?Journal of Heat Transfer, 1994
- The effect of concave surface curvature on the turbulent Prandtl number and the thermal law of the wallExperimental Thermal and Fluid Science, 1992
- Experimental Study of Differences in Single-Phase Forced-Convection Heat Transfer Characteristics between Upflow and Downflow for Narrow Rectangular ChannelJournal of Nuclear Science and Technology, 1985
- Heat Transfer to Water in Thin Rectangular ChannelsJournal of Heat Transfer, 1959
- Heat Transfer and Pressure Drop of Liquids in TubesIndustrial & Engineering Chemistry, 1936