Water Holding Capacities of Fly Ashes: Effect of Size Fractionation
Authors:
- 1 March 2007
- journal article
- research article
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 29 (5) , 471-482
Abstract
Water holding capacities of fly ashes from different thermal power plants in Eastern India have been compared. Moreover, the effect of size fractionation (sieving) on the water holding capacities has also been determined. The desorption rate of water held by the fly ash fractions at ambient temperature (25–30°C) has been investigated. The effect of mixing various size fractions of fly ash in increasing the water holding capacities of fly ash has been studied. It is observed that the fly ash obtained from a thermal power plant working on stoker-fired combustor has the highest water holding capacity, followed by the one that works on pulverized fuel combustor. Fly ash collected from super thermal power plant has the least water holding capacity (40.7%). The coarser size fractions of fly ashes in general have higher water holding capacities than the finer ones. An attempt has been made to correlate the results obtained, with the potential use in agriculture.Keywords
This publication has 4 references indexed in Scilit:
- Use of ternary blends containing silica fume and fly ash to suppress expansion due to alkali–silica reaction in concreteCement and Concrete Research, 2002
- Properties of high-strength concrete using a fine fly ashCement and Concrete Research, 1998
- Special Articles on Chemistry and Technology for Recycling Inorganic and Organic Materials. Manufacture of Lightweight Aggregates Utilizing Coal Fly Ash.NIPPON KAGAKU KAISHI, 1992
- Physical Properties of Fly Ash‐Amended SoilsJournal of Environmental Quality, 1977