Reaction behavior of SO2 in the sintering process with flue gas recirculation
Authors:
- 10 March 2016
- journal article
- research article
- Published by Taylor & Francis in Journal of the Air & Waste Management Association
- Vol. 66 (7) , 687-697
Abstract
The primary goal of this paper is to reveal the reaction behavior of SO2 in the sinter zone, combustion zone, drying–preheating zone, and over-wet zone during flue gas recirculation (FGR) technique. The results showed that SO2 retention in the sinter zone was associated with free-CaO in the form of CaSO3/CaSO4, and the SO2 adsorption reached a maximum under 900ºC. SO2 in the flue gas came almost from the combustion zone. One reaction behavior was the oxidation of sulfur in the sintering mix when the temperature was between 800 and 1000ºC; the other behavior was the decomposition of sulfite/sulfate when the temperature was over 1000ºC. However, the SO2 adsorption in the sintering bed mainly occurred in the drying–preheating zone, adsorbed by CaCO3, Ca(OH)2, and CaO. When the SO2 adsorption reaction in the drying–preheating zone reached equilibrium, the excess SO2 gas continued to migrate to the over-wet zone and was then absorbed by Ca(OH)2 and H2O. The emission rising point of SO2 moved forward in combustion zone, and the concentration of SO2 emissions significantly increased in the case of flue gas recirculation (FGR) technique. Implications: Aiming for the reuse of the sensible heat and a reduction in exhaust gas emission, the FGR technique is proposed in the iron ore sintering process. When using the FGR technique, SO2 emission in exhaust gas gets changed. In practice, the application of the FGR technique in a sinter plant should be cooperative with the flue gas desulfurization (FGD) technique. Thus, it is necessary to study the influence of the FGR technique on SO2 emissions because it will directly influence the demand and design of the FGD system.Keywords
Funding Information
- National Natural Science Foundation of China (51304245)
- 2014 Hunan Provincial Innovation Foundation for Postgraduate (CX2014B094)
- outstanding and creative doctor scholarship of Central South University (2013bjjxj015)
This publication has 10 references indexed in Scilit:
- Appropriate Technology Parameters of Iron Ore Sintering Process with Flue Gas RecirculationISIJ International, 2014
- Behavior of SO2 in the Process of Flue Gas Circulation Sintering (FGCS) for Iron OresISIJ International, 2014
- Co-control of Local Air Pollutants and CO2 in the Chinese Iron and Steel IndustryEnvironmental Science & Technology, 2013
- Sulfur Dioxide Emissions from Combustion in China: From 1990 to 2007Environmental Science & Technology, 2011
- Removal of SO2 from Flue Gas by Sodium Humate SolutionEnergy & Fuels, 2010
- Gaseous emissions from waste combustionJournal of Hazardous Materials, 2007
- Analysis of Exhaust Gas Visibility in Iron Ore Sintering PlantISIJ International, 2006
- Flue Gas Desulfurization: The State of the ArtJournal of the Air & Waste Management Association, 2001
- Designation of acid rain and SO2control zones and control policies in ChinaJournal of Environmental Science and Health, Part A, 2000
- Development of coal combustion pollution control for SO2 and NOx in ChinaFuel Processing Technology, 2000