Sensitivity of state‐of‐the‐art and high efficiency crystalline silicon solar cells to metal impurities
- 27 March 2012
- journal article
- research article
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 21 (5) , 1163-1170
Abstract
For the first time, the sensitivity to impurities of the solar cell conversion efficiency is reported for a state‐of‐the‐art (i.e., 18%) and advanced device architecture (i.e., 23%). The data are based on the experimental results obtained in the CrystalClear project for the state‐of‐the‐art cell process and extrapolated to a device with excellent front and rear surface passivation. Both device structures are not assumed to work in low injection level as several studies assumed before, but real operating conditions are considered. This is a fundamental difference with the past and required for modeling future high efficiency devices. The impurity with highest impact is Ti, followed by Cu, Cr, Ni and Fe, which form together a group two order of magnitude less sensitive than the former. In high efficiency devices, a large reduction of the impurity impact is visible for impurities with large capture cross‐section ratio like Fe, which reduces its relative difference in comparison with, for example, Cr, which has a small capture cross‐section ratio. In general, advanced devices will be more sensitive to the impurity content than the state‐of‐the‐art cell design. This effect is partly compensated by a reduction of the substrate thickness. The impurity sensitivity as function of the substrate thickness is reported. Copyright © 2012 John Wiley & Sons, Ltd.Keywords
This publication has 22 references indexed in Scilit:
- Impact of Metal Contamination in Silicon Solar CellsAdvanced Functional Materials, 2011
- Research on efficiency limiting defects and defect engineering in silicon solar cells ‐ results of the German research cluster SolarFocusphysica status solidi (c), 2010
- Towards solar grade silicon: Challenges and benefits for low cost photovoltaicsSolar Energy Materials and Solar Cells, 2010
- Acceptable contamination levels in solar grade silicon: From feedstock to solar cellMaterials Science and Engineering: B, 2009
- Effect of intentional bulk contamination with iron on multicrystalline silicon solar cell propertiesJournal of Applied Physics, 2007
- Influence of iron contamination on the performances of single-crystalline silicon solar cells: Computed and experimental resultsJournal of Applied Physics, 2006
- Effect of gettered iron on recombination in diffused regions of crystalline silicon wafersApplied Physics Letters, 2006
- From electronic grade to solar grade silicon: chances and challenges in photovoltaicsPhysica Status Solidi (a), 2005
- General parameterization of Auger recombination in crystalline siliconJournal of Applied Physics, 2002
- Impurities in silicon solar cellsIEEE Transactions on Electron Devices, 1980