Dual Fuel Combustion Study Using 3D CFD Tool
Authors:
- 5 April 2016
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
The current boom in natural gas from shale formations in the United States has reduced the price of natural gas to less than the price of petroleum fuels. Thus it is attractive to convert high horsepower diesel engines that use large quantities of fuel to dual fuel operation where a portion of the diesel fuel is replaced by natural gas. The substitution is limited by emissions of unburned natural gas and severe combustion phenomena such as auto-ignition or knock of the mixture and high rates of pressure rise during the ignition and early phase combustion of the diesel and natural gas-air mixture. In this work, the combustion process for dual fuel combustion was investigated using 3D CFD. The combustion process was modeled using detailed chemistry and a simulation domain sensitivity study was conducted to investigate the combustion to CFD geometry assumptions. A baseline model capturing the onset of knock was validated against experimental data from a heavy-duty dual-fuel engine. The model was then applied to different operating conditions exhibiting varying levels of knock strength. The modeling results were then used to monitor the low temperature combustion phenomena by evaluating the formation of formaldehyde and other combustion radicals. These reactive species reacted easily with natural gas, leading to auto-ignition. As the consumption of natural gas increased, the heat release increased and knock occurred.Keywords
This publication has 20 references indexed in Scilit:
- Ability of the Methane Number Index of a Fuel to Predict Rapid Combustion in Heavy Duty Dual Fuel Engines for North American Locomotives2015
- Multidimensional Modeling and Validation of Dual-Fuel Combustion in a Large Bore Medium Speed Diesel Engine2015
- An Evaluation of Knock Determination Techniques for Diesel-Natural Gas Dual Fuel EnginesSAE International Journal of Advances and Current Practices in Mobility, 2014
- A Multi-Dimensional CFD-Chemical Kinetics Approach in Detection and Reduction of Knocking Combustion in Diesel-Natural Gas Dual-Fuel Engines Using Local Heat Release AnalysisSAE International Journal of Engines, 2013
- Performance evaluation of a constant speed IC engine on CNG, methane enriched biogas and biogasApplied Energy, 2011
- Development of an optimized chemical kinetic mechanism for homogeneous charge compression ignition combustion of a fuel blend of n-heptane and natural gas using a genetic algorithmProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2010
- Description of Knock Limit in a CFR Engine: Effects of Engine Settings and Gas QualitySAE International Journal of Advances and Current Practices in Mobility, 2009
- Effect of engine parameters and type of gaseous fuel on the performance of dual-fuel gas diesel engines—A critical reviewRenewable and Sustainable Energy Reviews, 2009
- A Technical Review of Compressed Natural Gas as an Alternative Fuel for Internal Combustion EnginesAmerican Journal of Engineering and Applied Sciences, 2008
- Knock in Dual-Fuel EnginesProceedings of the Institution of Mechanical Engineers, 1966