Long-Life Lithium–Sulfur Battery Derived from Nori-Based Nitrogen and Oxygen Dual-Doped 3D Hierarchical Biochar
- 24 May 2017
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (22) , 18889-18896
Abstract
Due to restrictions on the low conductivity of sulfur and soluble polysulfides during discharge, lithium sulfur batteries are unsuitable for further large scale applications. The current carbon based cathodes suffer from poor cycle stability and high cost. Recently, heteroatom doped carbons have been considered as a settlement to enhance the performance of lithium sulfur batteries. With this strategy, we report the low cost activated nori based N,O-doped 3D hierarchical carbon material (ANC) as a sulfur host. The N,O dual-doped ANC reveals an elevated electrochemical performance, which exhibits not only a good rate performance over 5 C, but also a high sulfur content of 81.2%. Further importantly, the ANC represents an excellent cycling stability, the cathode reserves a capacity of 618 mAh/g at 2 C after 1000 cycles, which shows a 0.022% capacity decay per cycle.Keywords
Funding Information
- China Postdoctoral Science Foundation (2016M600253)
- National Natural Science Foundation of China (21646012)
- State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology (2016DX08)
This publication has 34 references indexed in Scilit:
- A simple melting-diffusing-reacting strategy to fabricate S/NiS 2 –C for lithium–sulfur batteriesNanoscale, 2016
- Hierarchical TiO2 spheres assisted with graphene for a high performance lithium–sulfur batteryJournal of Materials Chemistry A, 2016
- Sulfur Encapsulated in Graphitic Carbon Nanocages for High‐Rate and Long‐Cycle Lithium–Sulfur BatteriesAdvanced Materials, 2016
- 3D Vertically Aligned and Interconnected Porous Carbon Nanosheets as Sulfur Immobilizers for High Performance Lithium‐Sulfur BatteriesAdvanced Energy Materials, 2016
- 2D Monolayer MoS2–Carbon Interoverlapped Superstructure: Engineering Ideal Atomic Interface for Lithium Ion StorageAdvanced Materials, 2015
- Sulphur–TiO2 yolk–shell nanoarchitecture with internal void space for long-cycle lithium–sulphur batteriesNature Communications, 2013
- Li–O2 and Li–S batteries with high energy storageNature Materials, 2011
- Challenges for Rechargeable Li BatteriesChemistry of Materials, 2009
- A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteriesNature Materials, 2009
- Building better batteriesNature, 2008