The knowledge of accurate performance data of porous materials is an essential need for investigation of new candidate sorbent materials for use in cryosorption devices. The temperature range between 5 K and 20 K is foreseen to be used in order to exploit the cryosorption mechanism in cryovacuum pump systems for nuclear fusion. But direct experimental data at cryogenic temperatures are very scarce in the open literature, especially at temperature levels other than LHe or LN. Thus, a novel device was developed to measure sorption characteristics of porous materials under variable temperature cryogenic conditions (3.5 K to 100 K). The COOLSORP facility is based on a commercially available pore‐analyser, upgraded by a heatable, closed He cycle, two‐stage Gifford McMahon refrigerator. This facility is characterised by its wide range of accessible pressures, from ambient down to 10−4 Pa. The paper describes the facility set‐up and and presents typical examples of low temperature sorption data on different gases (helium, hydrogen, deuterium, nitrogen) for activated carbon and getter materials. COOLSORP is demonstrated to be a versatile facility which cannot only be used for scientific purposes to investigate different materials, but also for quality assurance purposes.