Performance of Low Modulus Fibers in Engineered Cementitious Composites (ECCs): Flexural Strength and Pull out Resistance
Authors:
- 24 April 2013
- journal article
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 687, 495-501
Abstract
Cement based materials are brittle in nature. Fibers have been used to improve flexural/tensile behaviors of the cementitious materials from one hundred years ago. Recently, a new generation of high performance fiber reinforced cementitious composites (HPFRCCs) has been introduced by Professor V.C. Li which was called Engineered Cementitious Composite (ECC). ECC showed incredible flexural and tensile strengths as it was called as flexible concrete by some researchers. Usually, high modulus fibers have been used in ECCs as reinforcement. In this research, homemade low modulus fibers (acrylic, nylon 66 and polypropylene) were used as reinforcement in ECC. Flexural strength test were performed on the ECC sheets. Also, Pull out test was performed to determine adhesion energy and toughness between the fibers and the matrix. It was found that low modulus fibers caused lower flexural strength and bonding to matrix than PVA fibers. However, they were found as suitable fibers for products with good cost-quality balance especially for construction purposes.Keywords
This publication has 21 references indexed in Scilit:
- Influence of acrylic fibers geometry on the mechanical performance of fiber‐cement compositesJournal of Applied Polymer Science, 2012
- Investigation on polymeric fibers as reinforcement in cementitious composites: Flexural performanceJournal of Industrial Textiles, 2011
- Water permeability of engineered cementitious compositesCement and Concrete Composites, 2009
- Comparative flexural behavior of four fiber reinforced cementitious compositesCement and Concrete Composites, 2008
- Bonding characteristics of multifilament polymer yarns and cement matricesComposites Part A: Applied Science and Manufacturing, 2008
- Tensile and fiber dispersion performance of ECC (engineered cementitious composites) produced with ground granulated blast furnace slagCement and Concrete Research, 2007
- High Performance Fiber Reinforced Cement Composites HPFRCC-4: International RILEM WorkshopMaterials and Structures, 2003
- Interface Tailoring for Strain-Hardening Polyvinyl Alcohol-Engineered Cementitious Composite (PVA-ECC)ACI Materials Journal, 2002
- Role of Interfaces in Controlling Durability of Fiber-Reinforced CementsJournal of Materials in Civil Engineering, 2000
- Age effect on the characteristics of fibre/cement interfacial propertiesJournal of Materials Science, 1997