Fragility analysis of tall pier bridges subjected to near-fault pulse-like ground motions
- 4 November 2019
- journal article
- research article
- Published by Taylor & Francis in Structure and Infrastructure Engineering
- Vol. 16 (8) , 1082-1095
Abstract
More than 40% of bridges in Southwest China have piers over 40 m height. The seismic behaviour of these bridges is critical, especially exposed to near-fault pulse-like ground motions. This paper conducts fragility analyses to assess the seismic vulnerability of tall pier bridges under near-fault motions. Fragility curves are developed for a typical 50-m tall pier and a 10 m conventional pier with probabilistic seismic demand models (PSDMs). When developing the PSDMs, curvature ductility at pier base is used as the demand parameter; the 5% damped spectral acceleration of the fundamental period (Sa(T1, 5%)) is employed as an intensity measure of the motions. Results show that the 50 m pier is less vulnerable than the 10 m pier under both the near-fault and far-field motions and is unlikely to collapse in real earthquake events. Furthermore, the seismic fragility of the 50 m pier is found highly related to the pre-defined damage state capacities, indicating that the damage states should be carefully specified to properly estimate the vulnerability of tall piers. Finally, analyses are conducted for piers with heights of 40, 60, 70, and 80 m, extending the conclusions obtained from 50 m pier to a class of tall piers.Keywords
This publication has 42 references indexed in Scilit:
- Tuned tandem mass dampers-inerters with broadband high effectiveness for structures under white noise base excitationsStructural Control and Health Monitoring, 2019
- Shake Table Tests of Tall-Pier Bridges to Evaluate Seismic PerformanceJournal of Bridge Engineering, 2018
- Effects of Higher Modes on Tall Piers2016
- Fragility Analysis of Retrofitted Multicolumn Bridge Bent Subjected to Near-Fault and Far-Field Ground MotionJournal of Bridge Engineering, 2013
- Seismic fragility assessment of SMA-bar restrained multi-span continuous highway bridge isolated by different laminated rubber bearings in medium to strong seismic risk zonesBulletin of Earthquake Engineering, 2012
- Conditional Mean Spectrum: Tool for Ground-Motion SelectionJournal of Structural Engineering, 2011
- Problems in applying code-specified capacity design procedures to seismic design of tall piersEngineering Structures, 2009
- Spectral shape, epsilon and record selectionEarthquake Engineering & Structural Dynamics, 2006
- Characterization of forward-directivity ground motions in the near-fault regionSoil Dynamics and Earthquake Engineering, 2004
- Probabilistic Basis for 2000 SAC Federal Emergency Management Agency Steel Moment Frame GuidelinesJournal of Structural Engineering, 2002