Review of catalyst materials and catalytic steam reforming reactions in SOFC anodes
- 8 June 2011
- journal article
- review article
- Published by Hindawi Limited in International Journal of Energy Research
- Vol. 35 (15) , 1340-1350
Abstract
SUMMARY It is expected that fuel cells will play a significant role in the future sustainable energy system, because of their high energy efficiency and possibility to use renewable fuels. Fuels, such as biogas, can be produced locally close to the customers. The improvement for FCs during the last years has been fast, but the technology is still in the early phases of development, in terms of cost, stability and market sharing. The reforming reaction of hydrocarbons (e.g., methane) is significant for an effective solid oxide fuel cell operation. This reaction could either be described by global kinetics or by elementary surface reaction kinetics. When a global approach is applied, the reaction rates depend on temperature, partial pressures, activation energy and the pre‐exponential factor. Note that the last two mentioned parameters are normally calculated from experimental data. Different detailed reaction mechanisms (considering elementary surface kinetics) are developed, but there is a disagreement considering the involved reaction pathways, rate‐limiting steps and intermediate species. It is found that detailed kinetics of the reforming reaction is important for design and development of new effective catalytic materials. A thermodynamic analysis tells that nickel and ruthenium are suitable catalytic materials for the methane reforming reactions. Copyright © 2011 John Wiley & Sons, Ltd.Keywords
This publication has 35 references indexed in Scilit:
- Review on modeling development for multiscale chemical reactions coupled transport phenomena in solid oxide fuel cellsApplied Energy, 2010
- Modelling of tubular-designed solid oxide fuel cell with indirect internal reforming operation fed by different primary fuelsJournal of Power Sources, 2010
- Ammonia-fed solid oxide fuel cells for power generation-A reviewInternational Journal of Energy Research, 2009
- Effect of complex oxide promoters and Pd on activity and stability of Ni/YSZ (ScSZ) cermets as anode materials for IT SOFCCatalysis Today, 2008
- Alternative anode materials for solid oxide fuel cellsJournal of Power Sources, 2007
- A review of numerical modeling of solid oxide fuel cellsInternational Journal of Hydrogen Energy, 2007
- A study of thermal stability and methane tolerance of Cu-based SOFC anodes with electrodeposited CoElectrochimica Acta, 2007
- Catalytic modification of conventional SOFC anodes with a view to reducing their activity for direct internal reforming of natural gasJournal of Power Sources, 2006
- Modeling Elementary Heterogeneous Chemistry and Electrochemistry in Solid-Oxide Fuel CellsJournal of the Electrochemical Society, 2005
- Catalytic aspects of the steam reforming of hydrocarbons in internal reforming fuel cellsCatalysis Today, 1997