Optimization of the pre-tension and separation distance for measurement of the dynamic elastic modulus and macromolecular orientation of a polypropylene monofilament via the sonic velocity method
Authors:
- 1 December 2020
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 91 (12) , 123906
Abstract
Using a fiber orientation degree measurement instrument (i.e., a dynamic modulus tester), 28 groups of averaged sonic pulse travel times in a polypropylene monofilament were measured and recorded under five pre-tensions across eight separation distances. The zero-time (or delay time) T0, sonic velocity C, sonic modulus E, Hermans orientation factor F, and orientation angle θ were calculated via two- and multi-point methods. The good agreement observed between the scatter plots of calculated data and the regression lines shows that the multi-point method provides reliable, accurate determination of the sonic modulus (or the dynamic elastic modulus) and the orientation parameters. Surprisingly, the zero-time for sonic pulse propagation depends significantly on the separation distance in practice, although it does not in theory. For easy and rapid measurement or relative comparisons using the two-point method, the optimal range of pre-tension is 0.1 gf/den–0.2 gf/den, and the optimal separation distances are 200 mm and 400 mm. The two-point method is appropriate for industrial applications, while because of its greater accuracy, the multi-point method is preferred for scientific research.Keywords
This publication has 32 references indexed in Scilit:
- Non-invasive determination of the complete elastic moduli of spider silksNature Materials, 2013
- Laser Scanning System for Real‐Time Mapping of Fiber Formations in Meat AnaloguesJournal of Food Science, 2009
- Properties of high modulus PEEK yarns for aerospace applicationsJournal of Applied Polymer Science, 2009
- Yttria–polystyrene–polypropylene composite for fine dyeable fibersJournal of Applied Polymer Science, 2007
- SAXS Study of Oriented Crystallization of Polypropylene from a Quiescent MeltMacromolecules, 2007
- Orientation of cellulose crystallites in regenerated cellulose fibres under tensile and bending loadsCellulose, 2006
- Fluorescence anisotropy of pyrene incorporated in nylon as a tool to monitor thermal relaxations in nylonPolymer Testing, 2003
- Studies on the biodegradable poly(hexano-6-lactone) fibers 1. Structure and properties of drawn poly(hexano-6-lactone) fibers (Technical Report)Pure and Applied Chemistry, 1997
- Measurement of the dynamic elastic modulus of short staple fibersJournal of Applied Polymer Science, 1974
- Sound Velocity MeasurementsTextile Research, 1944