APPLICATION OF LOCAL DAMAGE MODELS TO THE NUMERICAL ANALYSIS OF DUCTILE RUPTURE
Authors:
- 1 May 1989
- journal article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 12 (3) , 201-212
Abstract
Abstract— Two damage models were implemented into the finite element program ADINA to study the correlation between microscopical damage and macroscopical material failure. In the first model, based on the Gurson yield function the nucleation, growth and the coalescence of voids were incorporated into the constitutive relations. In the second model the void growth was determined according to the Rice and Tracey model using the von Mises yield function, and material failure was simulated by eliminating the elements where the critical void growth ratio was exceeded. The numerical results for the local and global behaviour of the specimens were compared with experiments. The generality of the damage parameters was checked by investigating several specimen geometries. Both damage models deliver qualitatively consistent results with regard to the influence of the stress triaxiality on the void growth and on the beginning of the material failure. However, the Gurson model gives a more accurate numerical simulation because the damage development and the stress drop continue after the onset of void coalescence while the critical void growth model causes less convergence problems in the simulation of large crack extension. The Jn‐curve was estimated on the basis of both models.Keywords
This publication has 10 references indexed in Scilit:
- A finite element study of the near crack tip deformation of a ductile material under mixed mode loadingJournal of the Mechanics and Physics of Solids, 1987
- Microvoid growth and failure in the ligament between a hole and a blunt crack tipInternational Journal of Fracture, 1985
- An analysis of ductile rupture in notched barsJournal of the Mechanics and Physics of Solids, 1984
- On localization in ductile materials containing spherical voidsInternational Journal of Fracture, 1982
- Cavity formation from inclusions in ductile fracture of A508 steelMetallurgical Transactions A, 1981
- Void Nucleation Effects in Biaxially Stretched SheetsJournal of Engineering Materials and Technology, 1980
- The virtual crack extension method for nonlinear material behaviorComputer Methods in Applied Mechanics and Engineering, 1977
- Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile MediaJournal of Engineering Materials and Technology, 1977
- On the influence of microstructure on crack propagation mechanisms and fracture toughness of metallic materialsEngineering Fracture Mechanics, 1977
- On the ductile enlargement of voids in triaxial stress fields∗Journal of the Mechanics and Physics of Solids, 1969