Effect of thione primers on adhesive bonding between an indirect composite material and Ag-Pd-Cu-Au alloy
- 1 January 2014
- journal article
- research article
- Published by Japanese Society for Dental Materials and Devices in Dental Materials Journal
- Vol. 33 (5) , 681-688
Abstract
The current study evaluated the effect of primers on the shear bond strength of an indirect composite material joined to a silverpalladium-copper-gold (Ag-Pd-Cu-Au) alloy (Castwell). Disk specimens were cast from the alloy and were air-abraded with alumina. Eight metal primers were applied to the alloy surface. A light-polymerized indirect composite material (Solidex) was bonded to the alloy. Shear bond strength was determined both before and after the application of thermocycling. Two groups primed with Metaltite (thione) and M. L. Primer (sulfide) showed the greatest post-thermocycling bond strength (8.8 and 6.5 MPa). The results of the X-ray photoelectron spectroscopic (XPS) analysis suggested that the thione monomer (MTU-6) in the Metaltite primer was strongly adsorbed onto the Ag-Pd-Cu-Au alloy surface even after repeated cleaning with acetone. The application of either the thione (MTU-6) or sulfide primer is effective for enhancing the bonding between a composite material and Ag-Pd-Cu-Au alloy.Keywords
This publication has 39 references indexed in Scilit:
- Current status of zirconia restorationJournal of Prosthodontic Research, 2013
- Occlusal Wear of Provisional Implant-Supported RestorationsClinical Implant Dentistry and Related Research, 2013
- History and current state of metal adhesion systems used in prosthesis fabrication and placementJournal of Oral Science, 2013
- Color stability, gloss, and surface roughness of indirect composite resinsJournal of Oral Science, 2013
- The influence of polymerization conditions on color stability of three indirect composite materialsJournal of Oral Science, 2013
- Depth of cure and hardness of indirect composite materials polymerized with two metal halide laboratory curing unitsJournal of Oral Science, 2012
- Changes in chroma of two indirect composite materials polymerized with different polymerization systemsJournal of Oral Science, 2012
- Clinical evaluation of an urethane tetramethacrylate-based composite material as a prosthetic veneering agentJournal of Oral Rehabilitation, 2000
- Surface preparations for metal frameworks of composite resin veneered prostheses made with an adhesive opaque resinThe Journal of Prosthetic Dentistry, 1991
- 4-META Opaque Resin — A New Resin Strongly Adhesive to Nickel-Chromium AlloyJournal of Dental Research, 1981