Improving the Performance of Lightweight Crumb Rubber Mortar Using Synthetic, Natural, and Hybrid Fiber Reinforcements
Open Access
Abstract
The global market for tires is ever-growing, and partially replacing sand with crumb rubber (CR) as fine aggregates in concrete could reduce environmental pollution. However, the main barrier to the complete usage of recycled tire crumbs in construction is the deterioration effect of CR on the mechanical properties of cement-based composites. Therefore, this paper attempts to improve the fresh and hardened properties of crumb rubber mortar (CRM) by incorporating polypropylene-polyethylene synthetic fibers with coconut and kenaf natural fibers as reinforcements. A total of 18 mix designs were developed with varying fiber combinations and rubber crumb replacement. Subsequently, parametric studies with chemical admixture were conducted at 3, 7, and 28 days to improve the flowability and resulting mechanical properties of the fiber-reinforced CRM. According to the results, the single and hybrid fibers positively improved the mechanical properties of cement mortar at 5–15% CR replacement. It can be concluded that adding single and hybrid fibers enhanced the performance of cement mortar modified with tire crumb rubber aggregates by providing varying degrees of improvement.Keywords
Funding Information
- Universiti Malaysia Sabah (SLB2107)
This publication has 63 references indexed in Scilit:
- Properties and durability of HPC with tyre rubber wastesConstruction and Building Materials, 2012
- Fire performance of high-strength concrete reinforced with recycled rubber particlesMagazine of Concrete Research, 2011
- Waste tyre rubberized concrete: Properties at fresh and hardened stateWaste Management, 2010
- Improving rubber concrete by waste organic sulfur compoundsWaste Management & Research: The Journal for a Sustainable Circular Economy, 2009
- Mechanical properties of concrete containing a high volume of tire–rubber particlesWaste Management, 2008
- Strength development and chloride penetration in rubberized concretes with and without silica fumeMaterials and Structures, 2007
- Compressive strength of concrete with polypropylene fibre additionsStructural Survey, 2006
- Properties of rubberized concretes containing silica fumeCement and Concrete Research, 2004
- The use of rubber tire particles in concrete to replace mineral aggregatesCement and Concrete Composites, 1996
- Measurement and prediction of the strength of rubberized concreteCement and Concrete Composites, 1994