Effects of Residual Stress on Hydrogen Embrittlement of a Stretch-Formed Tempered Martensitic Steel Sheet
Authors:
- 15 April 2021
- journal article
- research article
- Published by Iron and Steel Institute of Japan in ISIJ International
- Vol. 61 (4) , 1170-1178
Abstract
The effects of residual stress on the hydrogen embrittlement behavior of a tempered martensitic steel sheet with 1-GPa-class tensile strength stretch-formed by a hemisphere punch simulating press-formed automotive structural parts were investigated. Cracking on the stretch-formed specimen induced by potentiostatic hydrogen charging was initiated in the foot of the impression of the specimen and propagated to the radial direction both toward the hillside and the plain. The mixture of quasi cleavage and intergranular fractures were observed whole through the fracture surface. Residual stress in the stretch-formed specimens was analyzed by using energy-dispersive X-ray diffraction method utilizing the synchrotron X-ray radiation at SPring-8. In addition, stress and plastic strain distributions in the specimen were analyzed by using Finite Element Method (FEM). These analyses depicted that the high tensile stress in the circumferential direction was in the foot of the impression, corresponding to the direction of the crack growth. The FEM analysis revealed that the high triaxial stress was in the foot suggesting accumulation of hydrogen. It was considered that the preferential crack initiation at the foot was promoted by the high residual stress in the circumferential direction and the hydrogen accumulation due to stress-induced diffusion.Keywords
This publication has 32 references indexed in Scilit:
- Influence of Sheared Edge on Hydrogen Embrittlement Resistance in Ultra-high Strength Steel SheetsTetsu-to-Hagane, 2013
- Effect of Plastic Strain and Preloading on Delayed Fracture Characteristics of High Strength SteelTetsu-to-Hagane, 2011
- Delayed Fracture Using CSRT Method and Hydrogen Trapping Characteristics of V-bearing High Strength SteelTetsu-to-Hagane, 2011
- Evaluation of susceptibility of high strength steels to delayed fracture by using cyclic corrosion test and slow strain rate testCorrosion Science, 2010
- Hydrogen Embrittlement of Hardened Low-carbon Sheet SteelISIJ International, 2010
- Evaluation of Hydrogen Embrittlement for High Strength Steel SheetsTetsu-to-Hagane, 2009
- Effects of Aluminum on Delayed Fracture Properties of Ultra High Strength Low Alloy TRIP-aided SteelsISIJ International, 2008
- Effect of hydrogen on the fracture behavior of high strength steel during slow strain rate testCorrosion Science, 2007
- Effect of hydrogen and stress concentration on the notch tensile strength of AISI 4135 steelMaterials Science and Engineering: A, 2005
- Hydrogen degradation of a boron-bearing steel with 1050 and 1300MPa strength levelsScripta Materialia, 2005