Effect of Ni–Zn ferrite on bandwidth and radiation efficiency of embedded antenna for mobile phone
Authors:
- 13 March 2008
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 103 (7) , 07E929
Abstract
Performance of inverted F meander antenna with a lossy ferrite film was investigated and compared to air-core antenna with the same design. We have fabricated ferrite film antenna using thick plated . Loss of the plated ferrite was about 1.5 around . It was found that bandwidth significantly increased by the use of lossy ferrite, while radiation efficiency (RE) decreased. However, the RE increases as the thickness of lossy ferrite film decreases below . The fractional bandwidth of ferrite film antenna was found to be 13.8%, which shows a 431% as compared to an air-core antenna. The center frequency for ferrite film antenna decreased from of the air-core antenna. This implies 7.5% decrease in the , while the gain of the ferrite was not much lower than the air-core antenna. Lossy ferrite thin film has been found to be effective in broadening of bandwidth, while retaining an acceptable gain.
Keywords
This publication has 4 references indexed in Scilit:
- High Deposition Rate Obtained for Spin-Sprayed Ni-Zn Ferrite Films Without Using Ammonia IonsIEEE Transactions on Magnetics, 2004
- Microstrip antenna technologyIEEE Transactions on Antennas and Propagation, 1981
- Loss Considerations for Microstrip Resonators (Short Papers)IEEE Transactions on Microwave Theory and Techniques, 1975
- Application of Ferrite to Electromagnetic Wave Absorber and its CharacteristicsIEEE Transactions on Microwave Theory and Techniques, 1971