Model for static recrystallisation critical temperature in microalloyed steels
Authors:
- S.F. MedinaSMS.F. Medina
- A. QuispeAQA. Quispe
- M. GómezMGM. Gómez
- 1 May 2001
- journal article
- Published by SAGE Publications in Materials Science and Technology
- Vol. 17 (5) , 536-544
Abstract
By means of hot torsion tests, the static recrystallisation critical temperature (SRCT) has been determined for 18 microalloyed steels classified into two groups. In one group the metallic microalloying element is vanadium, and in the other it is niobium. In both groups the microalloying element, carbon, and nitrogen contents vary from one steel to another. Tests have been carried out at various strains and strain rates, and recrystallisation–precipitation–time–temperature (RPTT) diagrams have been drawn for each steel in each condition. The SRCT is the asymptote of strain induced precipitation start Ps and end Pf curves, and its determination has permitted the construction of a model that quantifies the effects of all the external variables implicit in hot working such as strain and strain rate, and the internal variables such as austenite grain size and chemical composition of the steel. Hence, the influence of each of these variables has been quantified, and the model's prediction, comparing experimental values with calculated values, gives a correlation index of 0.9.Peer revieweKeywords
This publication has 9 references indexed in Scilit:
- Effect of strain on recrystallisation–precipitation interaction in low vanadium microalloyed steelMaterials Science and Technology, 1999
- Recrystallisation rates in austenite measured by double compression and stress relaxation methodsMaterials Science and Technology, 1998
- Determination of no-recrystallisation temperature in Nb-V-Ti microalloyed steel and discussion of its definitionMaterials Science and Technology, 1998
- Recrystallization-induced Precipitation Interaction in a Medium Carbon Vanadium Microalloyed Steel.ISIJ International, 1997
- Ferrite Grain Refinement by Large Reduction per Pass in Non-recrystallization Temperature Region of Austenite.ISIJ International, 1996
- A Technology for the Prediction and Control of Microstructural Changes and Mechanical Properties in Steel.ISIJ International, 1992
- Effect of intermediate cooling on grain refinement and precipitation during rolling of seamless tubesMaterials Science and Technology, 1991
- Effect of molybdenum, niobium, and vanadium on static recovery and recrystallization and on solute strengthening in microalloyed steelsMetallurgical Transactions A, 1983
- The kinetics of precipitation from supersaturated solid solutionsJournal of Physics and Chemistry of Solids, 1961