Synergism of Electrochemical and Mechanical Factors in Erosion−Corrosion
Authors:
- 10 February 2006
- journal article
- research article
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 110 (9) , 4217-4231
Abstract
A theoretical model was developed on basis of nonequilibrium thermodynamics, dislocation kinetics, and electrochemistry, which may lead to the quantitative assessment of material loss produced by the synergism of mechanical and electrochemical factors in an erosion−corrosion process, As predicted by this model, the synergistic effect results mainly from the interaction of two irreversible fluxes, namely, the anodic dissolution current density and the plastic flowing in the surface layer caused by dynamic plastic deformation. An enhanced anodic dissolution flux is induced by the dynamic surface plastic deformation resulting from the impingement of solid particles, which can be correlated to the wastage rate due to the mechanical erosion. Meanwhile, the anodic current present at the electrode surface, in turn, can increase the mobility of dislocation and reduce the resistance in the surface layer against plastic deformation. Such an effect is demonstrated by the hardness degradation of metals in corrosive media. Theoretical analysis indicates that the corrosion-induced hardness degradation is a linear function of the logarithm of anodic current density. The degradation of mechanical erosion resistance with decreasing hardness suggests that the corrosion-enhanced erosion may result from the degradation in hardness of target material induced by the anodic dissolution and the corresponding wastage is also a linear function of the logarithm of anodic current density. The theoretical predictions were compared with the experimental results of carbon steels obtained form the slurry-erosion tests and the micro-hardness measurements. The results indicate that the hardness degradation in corrosive media is mainly controlled by the anodic current density and is almost independent of the polarization behavior of steels.Keywords
This publication has 51 references indexed in Scilit:
- The Rotating Cylinder Electrode for Examining Velocity-Sensitive Corrosion—A ReviewCorrosion, 2004
- Mechanoelectrochemical behavior and creep corrosion of magnesium alloysMaterials Science and Engineering: A, 2001
- Environment-Induced Deformation Localization During Transgranular Stress Corrosion CrackingCorrosion, 1996
- Accelerative Effect of Wear on Corrosion of High-Alloy Stainless SteelCorrosion, 1993
- Anodically enhanced diffusion in Cu/Ag thin film couplesScripta Metallurgica et Materialia, 1993
- Cathodic processes on corroding low-carbon steel: the effect of the degree of deformationCorrosion Science, 1992
- Chemo-Mechanical Effects of Flow on CorrosionCorrosion, 1991
- 1990 Whitney Award Lecture: Chemo-Mechanical Interactions in Environmentally Induced CrackingCorrosion, 1990
- The Influence of Hydrodynamics on Erosion-Corrosion in Two-Phase Liquid–Particle FlowCorrosion, 1989
- Effect of Chromate Inhibitor on the Mechanical and Electrochemical Components of Erosion-Corrosion in Aqueous Slurries of SandCorrosion, 1981