Novel phosphorus‐containing hardeners with tailored chemical structures for epoxy resins: Synthesis and cured resin properties
- 14 May 2007
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 105 (5) , 2744-2759
Abstract
A comparative evaluation of systematically tailored chemical structures of various phosphorus‐containing aminic hardeners for epoxy resins was carried out. In particular, the effect of the oxidation state of the phosphorus in the hardener molecule on the curing behavior, the mechanical, thermomechanical, and hot‐wet properties of a cured bifunctional bisphenol‐A based thermoset is discussed. Particular attention is paid to the comparative pyrolysis of neat cured epoxy resins containing phosphine oxide, phosphinate, phosphonate, and phosphate (with a phosphorus content of about 2.6 wt %) and of the fire behavior of their corresponding carbon fiber‐reinforced composites. Comparatively faster curing thermosetting system with an enhanced flame retardancy and adequate processing behavior can be formulated by taking advantage of the higher reactivity of the phosphorus‐modified hardeners. For example, a combination of the high reactivity and of induced secondary crosslinking reactions leads to a comparatively high Tg when curing the epoxy using a substoichiometric amount of the phosphinate‐based hardener. The overall mechanical performance of the materials cured with the phosphorus‐containing hardeners is comparable to that of a 4,4′‐DDS‐cured reference system. While the various phosphorus‐containing hardeners in general provide the epoxy‐based matrix with enhanced flame retardancy properties, it is the flame inhibition in the gas phase especially that determines the improvement in fire retardancy of carbon fiber‐reinforced composites. In summary, the present study provides an important contribution towards developing a better understanding of the potential use of such phosphorus‐containing compounds to provide the composite matrix with sufficient flame retardancy while simultaneously maintaining its overall mechanical performance on a suitable level. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007Keywords
This publication has 61 references indexed in Scilit:
- Cure kinetics and morphology of blends of epoxy resin with poly (ether ether ketone) containing pendant tertiary butyl groupsPolymer, 2003
- Improving the toughness and flame retardancy of cured epoxy resin with brominated castor oilJournal of Applied Polymer Science, 2002
- Effect of the organophosphate structure on the physical and flame‐retardant properties of an epoxy resinJournal of Polymer Science Part A: Polymer Chemistry, 2001
- Flame‐retardant epoxy resin compounds containing novolac derivatives with aromatic compoundsPolymers for Advanced Technologies, 2001
- Flame-retardant epoxy resins from novel phosphorus-containing novolacPolymer, 2001
- Kinetic studies of an epoxy cure reaction by isothermal DSC analysisThermochimica Acta, 2000
- Toughening of a trifunctional epoxy system. II. Thermal characterization of epoxy/amine cureJournal of Applied Polymer Science, 1996
- Effect of stoichiometry and diffusion on an epoxy/amine reaction mechanismJournal of Polymer Science Part A: Polymer Chemistry, 1995
- Cure kinetics of elementary reactions of a diglycidyl ether of bisphenol A/diaminodiphenylsulfone epoxy resin: 2. Conversion versus timePolymer, 1993
- The glass transition temperature of nonstoichiometric epoxy–amine networksJournal of Polymer Science Part B: Polymer Physics, 1991