Repair of aged bulk‐fill composite with posterior composite: Effect of different surface treatments
- 8 September 2018
- journal article
- research article
- Published by Wiley in Journal of Esthetic and Restorative Dentistry
- Vol. 31 (3) , 246-252
Abstract
Objective: In the present study, the ability of posterior resin composite to repair aged bulk‐fill resin composite and vice versa were assessed by shear bond strength testing.Materials and Methods: Resin composite substrates were aged and surfaces were abraded with abrasive papers, then bulk‐fill substrates were repaired with posterior resin composite and vice versa using different surface treatments (no surface treatment [control]; etching with 37% phosphoric acid [H3PO4] for 20 seconds; etching with 10% hydrofluoric acid [HF] for 20 seconds; etching with 37% H3PO4 for 20 seconds + adhesive application; etching with 10% HF for 20 seconds + adhesive application; adhesive application only). Shear bond strengths (SBS) were then measured and surface roughness values (Ra) were determined. Cohesive strengths of nonaged resin composites were measured and used as reference groups. Resin composite surfaces after acid etching were evaluated by SEM. Data were analyzed using ANOVA and Fisher's LSD tests (P < .05).Results: ANOVA showed that resin composite repair type did not affect SBS significantly (P = .850), while it showed that surface treatments significantly affected the SBS (P = .000). Only a combination of etching with 10% HF for 20 seconds with resin adhesive application provided similar SBS values with those of the positive control.Conclusions: It was concluded that the aged bulk‐fill resin composite would be effectively repaired with conventional posterior resin composite or vice versa if proper repair protocol was deployed.Clinical Significance: The combination of 10% HF etching and adhesive application would provide efficient repair strength when the aged bulk fill resin composite is repaired with conventional posterior resin composite or vice versa.Keywords
This publication has 15 references indexed in Scilit:
- Composite–composite adhesion in dentistry: a systematic review and meta-analysisJournal of Adhesion Science and Technology, 2014
- Post-cure depth of cure of bulk fill dental resin-compositesDental Materials, 2014
- Polymerization shrinkage of recent low-shrinkage and bulk-fill resin compositesDental Materials, 2014
- Bulk-filling of high C-factor posterior cavities: Effect on adhesion to cavity-bottom dentinDental Materials, 2013
- Repair of silorane-based dental composites: Influence of surface treatmentsDental Materials, 2012
- In vitro comparison of mechanical properties and degree of cure of bulk fill compositesClinical Oral Investigations, 2012
- Longevity of posterior composite restorations: Not only a matter of materialsDental Materials, 2012
- Slumping tendency and rheological properties of flowable compositesDental Materials, 2010
- How should composite be layered to reduce shrinkage stress: Incremental or bulk filling?Dental Materials, 2008
- Effect of surface conditioning methods on the microtensile bond strength of resin composite to composite after aging conditionsDental Materials, 2007