Predicting Blast Waves from the Axial Direction of a Cylindrical Charge
Authors:
Open Access
- 10 December 2014
- journal article
- research article
- Published by Wiley in Propellants, Explosives, Pyrotechnics
- Vol. 40 (2) , 169-179
Abstract
Bare, cylindrical, explosive charges produce secondary shock waves in the direction of least presented area. Whilst the source of these shock waves was explored in the 1940’s, no attempt was made to predict them. This paper describes the detonation of bare, cylindrical charges of PE4 (RDX binder 88/12 %), mass 0.2 to 0.46 kg and with a length to diameter ratio of 4 to 1. High speed camera footage showed (i) the formation of the separate, primary, shock waves from the sides and ends of the charge, (ii) Mach reflection of these separate shock waves, giving rise to reflected, secondary shock waves, and (iii) the secondary shock waves catching and merging with the primary shock wave. In the axial direction, the secondary shock wave’s peak overpressure and impulse exceeded that of the primary shock wave for scaled distances, Z=R/M1/3≥3.9 m kg−1/3, whereMis the mass in kg andRthe distance from the charge in m. It was found possible to predict the primary peak overpressure,P, at all distances in the axial direction, for a constant length to diameter ratio, usingP=3075 Z−3−1732 Z−2+305 Z−1. Close in the primary peak overpressure is proportional toM/R3in the axial direction. It was not possible to predict the secondary peak overpressure with the data obtained. The total impulse from both shock waves,I, in the axial direction can be predicted usingI=746(M2/3/R)3−708(M2/3/R)2+306(M2/3/R).Keywords
This publication has 21 references indexed in Scilit:
- Optical Measurement of Peak Air Shock Pressures Following ExplosionsPropellants, Explosives, Pyrotechnics, 2013
- Numerical simulations of blast loads and structural deformation from near-field explosions in airInternational Journal of Impact Engineering, 2011
- A discrete particle approach to simulate the combined effect of blast and sand impact loading of steel platesJournal of the Mechanics and Physics of Solids, 2011
- Predicting the Peak Pressure from the Curved Surface of Detonating Cylindrical ChargesPropellants, Explosives, Pyrotechnics, 2011
- Predicting the Impulse from the Curved Surface of Detonating Cylindrical ChargesPropellants, Explosives, Pyrotechnics, 2011
- A method for transforming a full computation of the effects of a complex-explosion scenario to a simple computation by ConWepShock Waves, 2011
- Simulation of impulse effects from explosive charges containing metal particlesShock Waves, 2010
- Blast Load DiagnosticPropellants, Explosives, Pyrotechnics, 2009
- Numerical simulation on the interaction of blast waves with a series of aluminum cylinders at near-fieldInternational Journal of Impact Engineering, 2009
- Similarities of Shock Wave Damage in Air and in WaterPropellants, Explosives, Pyrotechnics, 1990