On the mechanical behavior of an Al 7075 alloy deformed by asymmetrical and conventional rolling
Open Access
- 1 January 2019
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 24 (1)
Abstract
Samples of the Al 7075 naturally and artificially aged were processed by conventional and asymmetrical rolling with 5% of thickness reduction. The rolling processes were evaluated under room temperature and under warm condition (130°C). Mechanical properties were evaluated by uniaxial tensile and Vickers microhardness tests. Microstructure evolutions were followed by optical microscopy analysis. Naturally aged samples showed better yield strengthening under warm processing. Greater ultimate stress and ductility under room temperature processing was also noticed in naturally aged specimens. Artificially aged samples showed better mechanical properties under room temperature, softening under warm processing due to grain recovery process. Microhardness tests showed expected results for both rolling types, especially on asymmetrical rolling with the higher predictions were observed. Micrographs have shown no expressive grain changes or refinement although its flattening was observed. Precipitates were analyzed by EDS/SEM revealing the presence of MgZn2 and CuMgAl along the matrix that provides plastic strengthening.Keywords
This publication has 18 references indexed in Scilit:
- Microstructure evolution and grain refinement in asymmetrically rolled aluminiumActa Materialia, 2014
- High-formability Al alloy sheet produced by asymmetric rolling of strip-cast sheetMaterials Science and Engineering: A, 2013
- Extreme grain refinement by severe plastic deformation: A wealth of challenging scienceActa Materialia, 2013
- Mechanical properties at room temperature of an Al–Zn–Mg–Cu alloy processed by equal channel angular pressingJournal of Alloys and Compounds, 2011
- Microstructural and texture changes in severely deformed aluminum alloysMaterials Characterization, 2011
- Deformation behaviour of ultrafine-grained 7075 aluminium alloyInternational Journal of Materials Research, 2009
- Mechanical properties and microstructures of ultrafine-grained pure aluminum by asymmetric rollingScripta Materialia, 2009
- Microstructure and mechanical properties of Mg–Al–Zn alloy sheets severely deformed by asymmetrical rollingScripta Materialia, 2007
- The Effect of Hydrostatic Pressure on Plastic Flow under Shearing StressJournal of Applied Physics, 1946
- On Torsion Combined with CompressionJournal of Applied Physics, 1943