Active Gate Driver With Turn-off Delay Control for Voltage Balancing of Series–Connected SiC MOSFETs
- 6 July 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (12) , 14575-14586
Abstract
Connecting semiconductor switches in series is a way to increase the voltage rating of a power electronic converter. However, if two switches are directly connected without any special effort, an uneven voltage between the switches can occur due to nonidentical characteristics of them. A significant voltage imbalance may destroy the switches, and both thermal and loss imbalance also lead to the unstable system. Since a silicon carbide (SiC) metal–oxide–semiconductor field–effect transistor ( mosfet ) has a faster switching speed and higher voltage blocking capability than silicon (Si) devices, existing voltage balancing methods for Si devices may not be suitable. This article proposes a voltage balancing method that controls turn- off delay time of the switch by adding one bipolar junction transistor (BJT) on a gate turn- off path. Depending on the base voltage of the BJT, turn- off resistance and delay time are actively changed which mitigates the imbalance problem. The theoretical analysis of the proposed method has been discussed in detail based on the classical mosfet model. Both the simulations and experiments have been performed to verify the theory and the validity of the proposed method where the voltage imbalance is reduced from 22.4% to 3.2% as well as reducing the switching loss at the entire voltage and load conditions.Keywords
Funding Information
- Konkuk University
This publication has 34 references indexed in Scilit:
- A Compact Gate Control and Voltage-Balancing Circuit for Series-Connected SiC MOSFETs and Its Application in a DC BreakerIEEE Transactions on Industrial Electronics, 2017
- Performance comparison of 10 kV#x2013;15 kV high voltage SiC modules and high voltage switch using series connected 1.7 kV LV SiC MOSFET devices2017
- Comparative Evaluation of 15-kV SiC MOSFET and 15-kV SiC IGBT for Medium-Voltage Converter Under the Same dv/dt ConditionsIEEE Journal of Emerging and Selected Topics in Power Electronics, 2016
- Performance evaluation of series connected 1700V SiC MOSFET devices2015
- DC link voltage balancing approach for cascaded H‐bridge active rectifier based on selective harmonic elimination‐pulse width modulationIET Power Electronics, 2015
- Wide-Bandgap-Based Power Devices: Reshaping the power electronics landscapeIEEE Power Electronics Magazine, 2015
- Overview of 1.2kV – 2.2kV SiC MOSFETs targeted for industrial power conversion applications2015
- Active Clamping Circuit With Status Feedback for Series-Connected HV-IGBTsIEEE Transactions on Industry Applications, 2014
- Recent Advances and Industrial Applications of Multilevel ConvertersIEEE Transactions on Industrial Electronics, 2010
- STATCOM Applying Flat-Packaged IGBTs Connected in SeriesIEEE Transactions on Power Electronics, 2005