Wireless Power Transfer Receiver With Adjustable Coil Output Voltage for Multiple Receivers Application
- 3 May 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 66 (5) , 4003-4012
Abstract
A receiver that can adjust the output voltage of coil is proposed to simultaneously charge as many receivers of different couplings as possible. One large coil of traditional receiver is split into two small coils while total coil volume is kept constant. The receiver has three output modes: half voltage, same voltage, and boosted voltage. Firstly, the boosted mode can produce the RX coil voltage that is ~60% higher than the traditional receiver with identical coil volume. It is useful for low-coupling and low-TX-output condition. Secondly, the half-voltage mode protects the semiconductor devices from overvoltage by outputting half of the traditional receiver with identical volume. It is necessary for high-coupling and high-TX-output condition with otherwise high voltage stress. Finally, same-voltage mode produces the same coil voltage as with traditional receiver. By the mode selection, relatively constant RX coil voltage can be maintained at both high coupling and low coupling conditions. This enables a single TX to charge both the strongly-coupled RX and the weakly-coupled RX simultaneously. In the experiment, the proposed 30 W receiver can operate across 1.9~7.5 cm whereas the conventional receiver is restricted to 3.5~5.5 cm.Keywords
Funding Information
- National Research Council of Science and Technology
- Korean government (ETRI 2017)
This publication has 27 references indexed in Scilit:
- Selective Wireless Power Transfer for Smart Power Distribution in a Miniature-Sized Multiple-Receiver SystemIEEE Transactions on Industrial Electronics, 2015
- Three-Dimensional Charging via Multimode Resonant Cavity Enabled Wireless Power TransferIEEE Transactions on Power Electronics, 2015
- Range-Adaptive Wireless Power Transfer Using Multiloop and Tunable Matching TechniquesIEEE Transactions on Industrial Electronics, 2015
- Wireless Power Transfer With Zero-Phase-Difference Capacitance ControlIEEE Transactions on Circuits and Systems I: Regular Papers, 2015
- A Triple-Loop Inductive Power Transmission System for Biomedical ApplicationsIEEE Transactions on Biomedical Circuits and Systems, 2015
- Maximum Energy Efficiency Tracking for Wireless Power Transfer SystemsIEEE Transactions on Power Electronics, 2014
- Selective Wireless Power Transfer to Multiple Loads Using Receivers of Different Resonant FrequenciesIEEE Transactions on Power Electronics, 2014
- Wireless Power Transfer Resonance Coupling Amplification by Load-Modulation Switching ControllerIEEE Transactions on Industrial Electronics, 2014
- Distant Energy Transfer for Artificial Human ImplantsIEEE Transactions on Biomedical Engineering, 2005
- Magnetism from conductors and enhanced nonlinear phenomenaIEEE Transactions on Microwave Theory and Techniques, 1999