Synthesis of fine zirconium carbide powder by carbothermal reaction of carbon‐coated zirconia particles
- 12 August 2017
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 100 (12) , 5444-5449
Abstract
In this study, a novel method for the synthesis of fine ZrC powder was presented. It consists of chemical vapor deposition ( CVD ) of C from CH 4 on ZrO 2 particles followed by carbothermal reaction. Firstly, optimal CVD conditions (1300 K and 30 minutes) yielding the stoichiometric amount of C deposit (23 wt%) were determined. Carbothermal reaction behavior of the carbon‐coated oxide particles was then investigated in Ar flow at 1700‐1800 K for 0‐120 minutes. Mass measurements, XRD and SEM techniques were used to characterize the products at various stages of the process. Lattice constants and mass losses of the samples increased to the levels of ZrC with increasing temperature and time. Almost pure ZrC powder (oxygen content: 0.59 wt%) with a mean particle size of ~170 nm was synthesized at 1800 K within 120 minutes. The present study demonstrates that ZrC powder can be synthesized at lower temperatures and shorter reaction times using C‐coated ZrO 2 powders compared with the conventional method which uses a mixture of ZrO 2 and solid C particles.Keywords
This publication has 17 references indexed in Scilit:
- Synthesis of ultrafine zirconium carbide particles by SHS in an Al–Zr–C system: Microstructural evaluation and formation modeJournal of Alloys and Compounds, 2013
- Theoretical and experimental investigations on the mechanism of carbothermal reduction of zirconiaCeramics International, 2013
- Solid-state reaction synthesis of ZrC from zirconium oxide at low temperatureInternational Journal of Refractory Metals and Hard Materials, 2013
- Generation and Characterization of Zirconium Carbide Nanoparticles by Wire Explosion ProcessMATERIALS TRANSACTIONS, 2012
- Fabrication of ZrC particles and its formation mechanism by self-propagating high-temperature synthesis from Fe–Zr–C elemental powdersJournal of Alloys and Compounds, 2011
- Mechanochemically activated synthesis of zirconium carbide nanoparticles at room temperature: A simple route to prepare nanoparticles of transition metal carbidesJournal of the European Ceramic Society, 2011
- Synthesis of nanosized zirconium carbide by laser pyrolysis routeJournal of Alloys and Compounds, 2009
- Zirconia carbothermal reduction: Non-isothermal kineticsInternational Journal of Refractory Metals and Hard Materials, 2009
- Deposition Mechanism for Chemical Vapor Deposition of Zirconium Carbide CoatingsJournal of the American Ceramic Society, 2008
- Carbothermal synthesis of ultra-fine zirconium carbide powders using inorganic precursors via sol–gel methodJournal of Sol-Gel Science and Technology, 2007