Magnetic properties of Fe-1.5wt% Si high-frequency powder cores
Open Access
- 1 December 2019
- journal article
- conference paper
- Published by AIP Publishing in AIP Advances
- Vol. 9 (12) , 125340
Abstract
Electro-magnetic devices, such as motors and inductors, have been continuously required to increase their operation frequency for high efficiency. To satisfy this requirement, Fe-Si powder cores with high electrical resistance have been attracted much attention although they have lower permeability than Fe-Si electrical steels. With increasing the Si content, the ductility of Fe-Si alloy sharply decreases, which further lowers the density and magnetic properties of cores. In this study, we aimed to fabricate Fe-Si powder cores with higher saturation magnetization and lower loss in 1 ∼ 10 kHz range compared with commercial products. As a result, fabricated Fe-1.5wt% [email protected]3(PO4)2 cores reached a 98% theoretical density and showed a magnetic flux density of 1.65 T at 10000 A/m and a core loss of 176.8 W/kg at 1 T @ 2 kHz.Keywords
Funding Information
- National Research Foundation of Korea (NRF-2016M3D1A1027836)
- Korea Institute of Energy Technology Evaluation and Planning (20174030201830)
This publication has 9 references indexed in Scilit:
- Review of Fe-6.5 wt%Si high silicon steel—A promising soft magnetic material for sub-kHz applicationJournal of Magnetism and Magnetic Materials, 2019
- The effects of Fe nano-powders on compaction behaviors and magnetic properties of SMCsJournal of Magnetism and Magnetic Materials, 2019
- Pure-iron/iron-based-alloy hybrid soft magnetic powder cores compacted at ultra-high pressureAIP Advances, 2017
- Magnetic Properties of Pure Iron Soft Magnetic Composites Coated by Manganese PhosphatesIEEE Transactions on Magnetics, 2017
- Evolution of phosphate coatings during high-temperature annealing and its influence on the Fe and FeSiAl soft magnetic compositesJournal of Alloys and Compounds, 2015
- Core Loss in Fe-Si Powder CoresJournal of the Magnetics Society of Japan, 2013
- Soft magnetic composite materials (SMCs)Journal of Materials Processing Technology, 2007
- Magnetic properties and workability of 6.5% Si steel sheetJournal of Magnetism and Magnetic Materials, 1996
- Calculation of the Energy Loss in Magnetic Sheet Materials Using a Domain ModelJournal of Applied Physics, 1958