Optimal Design of a T-Shaped Drum-Type Brake for Motorcycle Utilizing Magnetorheological Fluid
Authors:
- 18 April 2012
- journal article
- research article
- Published by Taylor & Francis in Mechanics Based Design of Structures and Machines
- Vol. 40 (2) , 153-162
Abstract
This research focuses on developing a new configuration and optimal design of magnetorheological (MR)-fluid-based brake (MR brake in short) for a middle-sized motorcycle that can replace conventional drum-type brake. A novel configuration featuring a T-shaped drum and a hybrid concept of magnetic circuit (using both axial and radial magnetic flux) to generate braking force is proposed for the MR brake. An optimal design of the MR brake considering the required braking torque, the temperature due to zero-field friction of MR fluid, the mass of the brake system, and all significant geometric dimensions is performed. After a brief introduction of the configuration of the proposed MR brake, the braking torque is derived based on Herschel–Bulkley rheological model of the MR fluid. The optimal design of the MR brake is then analyzed taking into account available space, mass, braking torque, and steady heat generated by zero-field friction torque of the MR brake. An optimization procedure based on the finite element analysis (FEA) integrated with an optimization tool is used to obtain optimal geometric dimensions of the MR brake. From the results, discussions on the performance improvement of the optimized MR brake are described.Keywords
This publication has 8 references indexed in Scilit:
- Optimal design of an automotive magnetorheological brake considering geometric dimensions and zero-field friction heatSmart Materials and Structures, 2010
- A geometrical optimization of a magneto-rheological rotary brake in a prosthetic kneeSmart Materials and Structures, 2010
- Magnetorheological fluids: characterization and modeling of magnetizationSmart Materials and Structures, 2009
- Multidisciplinary design optimization of an automotive magnetorheological brake designComputers & Structures, 2008
- Geometry optimization of MR valves constrained in a specific volume using the finite element methodSmart Materials and Structures, 2007
- Development of an MR-brake-based haptic deviceSmart Materials and Structures, 2006
- Review of magnetorheological (MR) fluids and its applications in vibration controlJournal of Marine Science and Application, 2006
- A performance evaluation of an automotive magnetorheological brake design with a sliding mode controllerMechatronics, 2006