A Comparative Study of the Corrosion Behavior of P110 Casing Steel in Simulated Concrete Liquid Containing Chloride and Annulus Fluid from an Oil Well
Open Access
Abstract
The corrosion behavior of P110 casing steel in simulated concrete liquid and simulated annulus fluid was investigated to reveal the corrosion pattern and protective properties of corrosion products in the two environments. Potentiodynamic polarization curves, electrochemical impedance spectroscopy (EIS), Mott–Schottky tests, and electrochemical noise (EN) tests were used to study the corrosion behavior of P110 casing steel in simulated concrete liquid and simulated annulus fluid saturated with CO2. Scanning electron microscopy (SEM) combined with Energy-Dispersive Spectrometer (EDS) mapping was used to characterize the corrosion morphology and elemental distribution of P110 casing steel. The results show that the corrosion resistance of P110 casing steel deteriorates with the increasing immersion days in the simulated annulus fluid, the impedance decreases gradually, and the corrosion-product film shows a loose and porous structure. In the simulated concrete liquid, under the condition of containing a low concentration of Cl−, the protection of the corrosion products gradually increases with the extension of immersion days. With the increasing concentration of Cl− and the extension of immersion days, the electrochemical noise resistance and charge transfer resistance of P110 steel decrease gradually, and the protective property of the corrosion-product film decreases, which is capable of forming steady pitting corrosion.Keywords
This publication has 31 references indexed in Scilit:
- The evolution and characterisation of the corrosion scales formed on 3Cr steel in CO2-containing conditions relevant to geothermal energy productionCorrosion Science, 2021
- CO2 Corrosion Behavior of High-Strength and Toughness V140 Steel for Oil Country Tubular GoodsJournal of Materials Engineering and Performance, 2020
- Predicting the time to corrosion initiation in reinforced concrete structures exposed to chloridesCement and Concrete Research, 2019
- Modelisation of chloride reactive transport in concrete including thermodynamic equilibrium, kinetic control and surface complexationCement and Concrete Research, 2018
- Corrosion of low alloy steel containing 0.5% chromium in supercritical CO2-saturated brine and water-saturated supercritical CO2 environmentsApplied Surface Science, 2018
- Study of depassivation of carbon steel in simulated concrete pore solution using different equivalent circuitsConstruction and Building Materials, 2017
- Corrosion behavior of steel submitted to chloride and sulphate ions in simulated concrete pore solutionConstruction and Building Materials, 2016
- Electrochemical evaluation of the corrosion behaviour of API-X100 pipeline steel in aerated bicarbonate solutionsCorrosion Science, 2012
- Initiation and repassivation of pitting corrosion of carbon steel in carbonated concrete pore solutionCorrosion Science, 2011
- Passivity of 316L stainless steel in borate buffer solution studied by Mott–Schottky analysis, atomic absorption spectrometry and X-ray photoelectron spectroscopyCorrosion Science, 2010