Pre-Deposition Interfacial Oxidation and Post-Deposition Interface Nitridation of LPCVD TEOS Used as Gate Dielectric on 4H-SiC
- 28 July 2020
- journal article
- research article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1004, 535-540
Abstract
In this work, the influence of pre-deposition interfacial oxidation or post-deposition interface nitridation on the performance of 4H-SiC MOS capacitors was investigated. The gate oxide was deposited by LPCVD using TEOS as a precursor. Interface breakdown strength was derived from leakage current and Time-Zero Dielectric Breakdown characteristics whereas interface quality was assessed by the determination of interface state density from the comparison of quasi-static and high frequency capacitance-voltage characteristics using high-low method. In the experimental results, it is demonstrated that the gate oxide deposited by LPCVD using TEOS which is post-deposition annealed in nitric oxide ambient is advantageous for trench-gate MOSFET due to its effectiveness for improving the interface quality and oxide reliability, whereas pre-deposition interfacial oxidation is deleterious to interface state density and breakdown strength.Keywords
This publication has 3 references indexed in Scilit:
- PECVD Deposited TEOS for Field-Effect Mobility Improvement in 4H-SiC MOSFETs on the (0001) and (11-20) FacesMaterials Science Forum, 2006
- Characteristics of Post-Nitridation Rapid-Thermal Annealed Gate Oxide Grown on 4H-SiCMaterials Science Forum, 2005
- An In-Situ Post Growth Annealing Process for the Improvement of 4H-SiC/SiO2 MOS Interface Prepared by CVD Using TEOS, and its Characteristic StudyMaterials Science Forum, 2005