Decolorization of textile wastewater by dye-imprinted polymer
Open Access
- 1 September 2016
- journal article
- research article
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (45) , 21577-21584
Abstract
Adsorption of dye molecules onto a sorbent can be an effective, low-cost method of decolorization of textile wastewater. Most of the techniques used for this aim were the high cost of production and the regeneration also makes them uneconomical. Molecular imprinting polymers are a new kind of materials which can be economical and effective adsorbents. In this study, a molecularly imprinted polymer (MIP) of textile dyes (Direct Red 23) was prepared for decolorization of textile wastewater and also used for leaching of this dye from the wastewater by adsorption of onto polymer. Acrylamide was used as a monomer and dimethyl sulfoxide was used as a porogen. The selective recognition ability of the MIP was studied by an equilibrium-adsorption batch method. The effective adsorption properties of the polymer were tested in synthetic dye wastewater. The high adsorption rate and the amount of imprinted dye that was removed from the polymer was nearly 65%. 80% of the dye was adsorbed by imprinted polymer in synthetic wastewater.Keywords
This publication has 17 references indexed in Scilit:
- Decolorization of dye wastewaters by biosorbents: A reviewJournal of Environmental Management, 2010
- Decolorization and COD reduction of disperse and reactive dyes wastewater using chemical-coagulation followed by sequential batch reactor (SBR) processDesalination, 2009
- Molecularly Imprinted Nanoporous Polyacrylate Surface for Benzo(α)Pyrene RecognitionJournal of Nanoscience and Nanotechnology, 2009
- Removal of Reactive Black 5 from aqueous solutions using magnetic chitosan resinsJournal of Hazardous Materials, 2009
- Selective separation of basic and reactive dyes by molecularly imprinted polymers (MIPs)Chemical Engineering Journal, 2009
- Removal of synthetic reactive dyes from textile wastewater by Sorel's cementJournal of Hazardous Materials, 2009
- Selective determination of acidic pharmaceuticals in wastewater using molecularly imprinted solid-phase extractionAnalytica Chimica Acta, 2008
- Photocatalytic degradation of Direct Red 23 dye using UV/TiO2: Effect of operational parametersJournal of Hazardous Materials, 2008
- Review paper on current technologies for decolourisation of textile wastewaters: Perspectives for anaerobic biotechnologyBioresource Technology, 2007
- Application of molecularly imprinted polymers to solid-phase extraction of analytes from real samplesJournal of Biochemical and Biophysical Methods, 2007