System Identification and Pitch Control of a Planing Hull Ship with a Controllable Stern Intercepter

Authors:
  • HCHujae Choi
    Hujae Choi
  • JPJongyong Park
    Jongyong Park
  • DKDongjin Kim
    Dongjin Kim
  • SKSunyoung Kim
    Sunyoung Kim
  • JLJooho Lee
    Jooho Lee
  • JAJinhyeong Ahn
    Jinhyeong Ahn
  • NKNakwan Kim
    Nakwan Kim

Abstract
Planing hull type ships are often equipped with interceptor or trim tab to improve the excessive trim angle which leads to poor resistance and sea keeping performances. The purpose of this study is to design a controller to control the attitude of the ship by controllable stern interceptor and validate the effectiveness of the attitude control by the towing tank test. Embedded controller, servo motor and controllable stern interceptor system were equipped with planing hull type model ship. Prior to designing the control algorithm, a model test was performed to identify the system dynamic model of the planing hull type ship including the stern interceptor. The matrix components of model were optimized by Genetic Algorithm. Using the identified model, PID controller which is a classical controller and sliding mode controller which is a nonlinear robust controller were designed. Gain tuning of the controllers and running simulation was conducted before the towing tank test. Inserting the designed control algorithm into the embedded controller of the model ship, the effectiveness of the active control of the stern interceptor was validated by towing tank test. In still water test with small disturbance, the sliding mode controller showed better performance of canceling the disturbance and the steady-state control performance than the PID controller.