Metal Embedded Optical Fiber Sensors: Laser-Based Layered Manufacturing Procedures
Authors:
- Hamidreza AlemohammadHAHamidreza Alemohammad
- Ehsan ToyserkaniETEhsan Toyserkani
- 1 June 2011
- journal article
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 133 (3) , 031015
Abstract
This paper describes laser-based layered manufacturing processes for embedding optical fiber Bragg gratings (FBGs) in metal structures to develop cutting tools with embedded sensors. FBG is a type of optical fiber that is used for the measurement of parameters manifesting as the changes of strain or temperature. The unique features of FBGs have encouraged their widespread use in structural measurements, failure diagnostics, thermal measurements, pressure monitoring, etc. Considering the unique features of FBGs, embedding of the sensors in metal parts for in-situ load monitoring is a cutting-edge research topic with a variety of applications in machining tools, aerospace, and automotive industries. The metal embedding process is a challenging task, as the thermal decay of UV-written gratings can start at a temperature of ∼200 °C and accelerates at higher temperatures. The embedding process described in this paper consists of low temperature laser microdeposition of on-fiber silver thin films followed by nickel electroplating in a steel part. A microscale laser-based direct write (DW) method, called laser-assisted maskless microdeposition (LAMM), is employed to deposit silver thin films on optical fibers. To attain thin films with optimum quality, a characterization scheme is designed to study the geometrical, mechanical, and microstructural properties of the thin films in terms of the LAMM process parameters. To realize the application of embedded FBG sensors in machining tools, the electroplating process is followed by the deposition of a layer of tungsten carbide-cobalt (WC-Co) by using laser solid freeform fabrication (LSFF). An optomechanical model is also developed to predict the optical response of the embedded FBGs. The performance of the embedded sensor is evaluated in a thermal cycle. The results show that the sensor attains its linear behavior after embedding. Microscopic analysis of the tool with the embedded sensor clearly exhibits the integrity of the deposited layers without cracks, porosity, and delamination.Keywords
This publication has 31 references indexed in Scilit:
- Simultaneous measurement of temperature and tensile loading using superstructure FBGs developed by laser direct writing of periodic on-fiber metallic filmsSmart Materials and Structures, 2009
- Morphology and microstructure analysis of nano-silver thin films deposited by laser-assisted maskless microdepositionJournal of Micromechanics and Microengineering, 2008
- Thermal cure effects on electrical performance of nanoparticle silver inksActa Materialia, 2007
- Thermal decay characteristics of strong fiber Bragg gratings showing high-temperature sustainabilityJournal of the Optical Society of America B, 2007
- Mechanical properties of thin Ag films on a silicon substrate studied using the nanoindentation techniquePhysics of the Solid State, 2005
- Metal coating for enhancing the sensitivity of fibre Bragg grating sensors at cryogenic temperatureSmart Materials and Structures, 2005
- Fiber grating spectraJournal of Lightwave Technology, 1997
- A Model of Embedded Fiber Optic Fabry-Perot Temperature and Strain SensorsJournal of Composite Materials, 1993
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- Metal-embedded fiber-optic Fabry–Perot sensorsOptics Letters, 1991