Influence of substrate temperature on the crystalline quality of AlN layers deposited by RF reactive magnetron sputtering
Authors:
Open Access
- 1 January 2015
- journal article
- conference paper
- Published by AIP Publishing in AIP Advances
- Vol. 5 (1) , 017136
Abstract
Aluminum nitride (AlN) is a promising material for use in applications such as ultraviolet light-emitting diodes and surface acoustic wave devices. In this study, AlN layers were fabricated on nitrided sapphire substrates using radio-frequency (RF) reactive magnetron sputtering. An AlN layer sputtered in 50 vol% N2 with a sputter power of 900 W at 823 K exhibited X-ray rocking curves for AlN (0002) and (10-12) with the best full width at half-maximum of 61 and 864 arcsec, respectively. The c-axis lattice constant of the AlN layers expanded with increasing substrate temperature because of the peening effect and thermal expansion difference between the AlN layer and sapphire substrate. Based on the results obtained here combined with those of our previous studies, a model explaining the roles of sputtering parameters in AlN layer growth using RF reactive sputtering was developed.Keywords
Funding Information
- Cabinet Office, Government of Japan (GR014)
This publication has 23 references indexed in Scilit:
- Growth of AlN by pulsed and conventional MOVPEJournal of Crystal Growth, 2013
- High-Quality AlN Layer Homoepitaxially Grown on Nitrideda-Plane Sapphire Using a Ga–Al FluxApplied Physics Express, 2013
- Control of threading dislocation density at the initial growth stage of AlN on c-sapphire in plasma-assisted MBEJournal of Crystal Growth, 2013
- Influence of source gas supply sequence on hydride vapor phase epitaxy of AlN on (0001) sapphire substratesJournal of Crystal Growth, 2012
- Analysis of the Dislocation and Polarity in an AlN Layer Grown Using Ga–Al FluxApplied Physics Express, 2012
- AlN homoepitaxial growth on sublimation-AlN substrate by low-pressure HVPEJournal of Crystal Growth, 2012
- The influence of sputter deposition parameters on piezoelectric and mechanical properties of AlN thin filmsMaterials Science and Engineering: B, 2010
- The preparation and characterization of preferred (110) orientation aluminum nitride thin films on Si (100) substrates by pulsed laser depositionVacuum, 2010
- Influence of the growth temperature of AlN buffer on the quality and stress of GaN films grown on 6H–SiC substrate by MOVPEJournal of Alloys and Compounds, 2010
- Preparation and rapid thermal annealing of AlN thin films grown by molecular beam epitaxySolid State Communications, 2009