Potential of alcohol fuels in active and passive pre-chamber applications in a passenger car spark-ignition engine
- 18 October 2021
- journal article
- research article
- Published by SAGE Publications in International Journal of Engine Research
- Vol. 24 (2) , 494-505
Abstract
Both the shift from fossil to alternative fuels and the implementation of a pre-chamber combustion system allow for an increase in the efficiency of an internal combustion engine through optimizing its combustion process, while simultaneously reducing the engine-out emissions. The combination of alcohol-based fuels and pre-chamber combustion concepts has not been investigated on spark-ignition engines with high compression ratios in a passenger car size. This study presents investigations to show the potential in maximum achievable lean limit and net indicated efficiency. In particular, we present investigations of two alternative alcohol fuels on a direct-injection spark-ignition single-cylinder research engine for passenger car applications with a compression ratio of 16.4. The engine was operated with both an active and a passive pre-chamber, and the experimental results were compared to those of conventional spark-ignition operation. Direct injection was used for both the main combustion chamber and the pre-chamber. Methanol and ethanol were used as fuels for the main combustion chamber, whereas exclusively ethanol was used for the pre-chamber fueling. The performance of the alcohol fuels in all combustion configurations was evaluated in both part-load and high-load conditions. In particular, investigations of the combustion behavior over a variation of the excess air ratio at indicated mean effective pressures of 6 and 15 bar were performed. It can be concluded that with the use of methanol as fuel for the main combustion chamber, both higher excess air ratios and higher indicated efficiencies were achieved compared to the use of ethanol as the main combustion chamber fuel. In particular, a maximum net indicated efficiency of 48% at an excess air ratio of 2.0 was achieved with methanol. Moreover, active pre-chamber operation extended the lean limit to an excess air ratio of 2.3 compared to the maximum lean limit of 1.7 in passive pre-chamber operation.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (390919832)
This publication has 11 references indexed in Scilit:
- Analysis of experimental results with an active pre-chamber ultra-lean burn SI engineInternational Journal of Engine Research, 2020
- Homogeneous charge compression ignition combustion stability improvement using a rapid ignition systemInternational Journal of Engine Research, 2020
- Effects of water addition on the combustion of iso-octane investigated in laminar flames, low-temperature reactors, and an HCCI engineCombustion and Flame, 2020
- Gasoline Fueled Pre-Chamber Ignition System for a Light-Duty Passenger Car Engine with Extended Lean LimitSAE International Journal of Engines, 2019
- Methanol as a fuel for internal combustion enginesProgress in Energy and Combustion Science, 2019
- Tailor-Made Fuels from Biomass: Potentials of 2-butanone and 2-methylfuran in direct injection spark ignition enginesFuel, 2016
- Tailor-made fuels for future engine conceptsInternational Journal of Engine Research, 2015
- Knock Limit Extension with a Gasoline Fueled Pre-Chamber Jet Igniter in a Modern Vehicle PowertrainSAE International Journal of Engines, 2012
- Flame Kernel Development for a Spark Initiated Pre-Chamber Combustion System Capable of High Load, High Efficiency and Near Zero NOx EmissionsSAE International Journal of Engines, 2010
- A Turbulent Jet Ignition Pre-Chamber Combustion System for Large Fuel Economy Improvements in a Modern Vehicle PowertrainSAE International Journal of Engines, 2010