Design and Operation of a Pilot-Scale Packed-Bed Bioreactor for the Production of Enzymes by Solid-State Fermentation
- 4 March 2019
- book chapter
- Published by Springer Nature
- Vol. 169, 27-50
Abstract
In this review, we describe our experience in building a pilot-scale packed-bed solid-state fermentation (SSF) bioreactor, with provision for intermittent mixing, and the use of this bioreactor to produce pectinases and lipases by filamentous fungi. We show that, at pilot scale, special attention must be given to several aspects that are not usually problematic when one works with laboratory-scale SSF bioreactors. For example, it can be a challenge to produce large amounts of inoculum if the fungus does not sporulate well. Likewise, at larger scales, the air preparation system needs as much attention as the bioreactor itself. Sampling can also be problematic if one wishes to avoid disrupting the bed structure. In the fermentations carried out in the pilot bioreactor, when the substrate bed contained predominantly wheat bran, the bed shrank away from the walls, providing preferential flow paths for the air and necessitating agitation of the bed. These problems were avoided by using beds with approximately 50% of sugarcane bagasse. We also show how a mathematical model that describes heat and water transfer in the bed can be a useful tool in developing appropriate control schemes.Keywords
This publication has 24 references indexed in Scilit:
- Structural properties of beds packed with agro-industrial solid by-products applicable for solid-state fermentation: Experimental data and effects on process performanceChemical Engineering Journal, 2014
- Synthesis of Ethylic Esters for Biodiesel Purposes Using Lipases Naturally Immobilized in a Fermented Solid Produced Using Rhizopus microsporusEnergy & Fuels, 2014
- Hygroscopic Properties of Orange Pulp and PeelJournal of Food Process Engineering, 2013
- Control strategies for intermittently mixed, forcefully aerated solid-state fermentation bioreactors based on the analysis of a distributed parameter modelChemical Engineering Science, 2004
- Substrate aggregation due to aerial hyphae during discontinuously mixed solid‐state fermentation with Aspergillus oryzae: Experiments and modelingBiotechnology and Bioengineering, 2003
- Bioreactor designs for solid state fermentationBiochemical Engineering Journal, 2003
- A two‐phase model for water and heat transfer within an intermittently‐mixed solid‐state fermentation bioreactor with forced aerationBiotechnology and Bioengineering, 2002
- Validation of a model for process development and scale‐up of packed‐bed solid‐state bioreactorsBiotechnology and Bioengineering, 2002
- Scale-up strategies for packed-bed bioreactors for solid-state fermentationProcess Biochemistry, 1999
- Zymotis, a large scale solid state fermenter design and evaluationApplied Biochemistry and Biotechnology, 1993