Preparation of PVDF/PAR Composites with Piezoelectric Properties by Post-Treatment
Open Access
Abstract
Thermoplastic composites were prepared using poly (vinylidene fluoride) (PVDF) as the matrix with piezoelectric properties and aromatic polyarylate (PAR) as the reinforcing component. The PVDF/PAR conjugate fibers were prepared by melt conjugate spinning. The PVDF/PAR composites were prepared by compression molding of the PVDF/PAR conjugate fiber laminates at various molding temperatures. Drawing and poling post-treatments of the PVDF/PAR composites were performed to increase the β crystalline phase content of the PVDF. The morphologies of the PVDF/PAR composites were observed by scanning electron microscopy, and the tensile properties were tested using an universal testing machine. The crystal structure of the PVDF/PAR composites was confirmed by Fourier transform infrared spectroscopy and X-ray diffraction. The piezoelectric properties were tested using voltmeters and multimeters. The post-treatments enhanced the content of the β crystalline phase of the PVDF matrix, thereby improving the piezoelectric properties of the composites. A molding temperature of 180 °C, drawing temperature of 90 °C, and poling voltage of 12 kV were identified as the optimal conditions for the preparation of the PVDF/PAR composite.Keywords
Funding Information
- National Research Foundation of Korea (2017139002)
This publication has 18 references indexed in Scilit:
- Multilayer spin-coating deposition of poly(vinylidene fluoride) films for controlling thickness and piezoelectric responseSensors and Actuators A: Physical, 2013
- Pressure sensor from a PVDF filmSensors and Actuators A: Physical, 2008
- Effect of tensile strain rate and elongation on crystalline structure and piezoelectric properties of PVDF thin filmsPolymer Testing, 2007
- Determination of the α, β, and γ crystalline phases of poly(vinylidene fluoride) films prepared at different conditionsJournal of Applied Polymer Science, 2006
- Thermal analysis of Vectran® fibers and filmsJournal of Thermal Analysis and Calorimetry, 1997
- Calculation of Crystal Structures, Dielectric Constants and Piezoelectric Properties of Wurtzite-Type Crystals Using Ab-Initio Periodic Hartree-Fock MethodJapanese Journal of Applied Physics, 1996
- Crushing Characteristics of Continuous Fiber-Reinforced Composite TubesJournal of Composite Materials, 1992
- Surface pretreatment and adhesion of thermoplastic fibre-compositesJournal of Materials Science Letters, 1988
- Structure development in melt spinning poly(vinylidene fluoride) fibers and tapesJournal of Applied Polymer Science, 1985
- The Piezoelectricity of Poly (vinylidene Fluoride)Japanese Journal of Applied Physics, 1969