Effect of Vanadium on the Microstructure and Mechanical Properties of 2100 MPa Ultra-High Strength High Plasticity Spring Steel Processed by a Novel Online Rapid-Induction Heat Treatment
Open Access
- 2 September 2022
- journal article
- research article
- Published by Springer Nature in Metals and Materials International
- Vol. 29 (4) , 922-933
Abstract
Advanced automotive industries generate large demand for the next generation of high strength and high toughness spring steels. Vanadium-containing 55SiCrV spring steels subjected to rapid-induction heating treatment can fulfil such requirements. However, the effect of vanadium microalloying under online rapid-induction heat treatments is rarely reported. A comparative study of the microstructure and tensile properties of 55SiCr and 55SiCrV spring steel wires subjected to a novel online rapid induction heat treatment has been demonstrated herein. It is found that the tensile strength of the 55SiCr spring wire decreases with the decrease in the wire speed in online rapid-induction heating, and the plasticity increases. Whereas, the tensile strength of the 55SiCrV steel wire increases with the decrease in the wire speed with the retained high plasticity, which is attributed to the strengthening effect of the dislocations. Through the optimized rapid-induction heating/cooling thermal cycles and intermediate-temperature tempering treatment, the tensile strength of the 55SiCrV steel wire approaches 2106 MPa with total elongation of 9.7%. Compared with the 55SiCr spring steel, the addition of V in 55SiCrV spring steel changes the strengthening and toughening mechanisms via the grain refinement and enhancement in the hardenability and tempering resistance. The finely dispersed V-containing secondary phases are rarely found in the matrix, which indicates that the precipitation effect stemming from the addition of V is not the dominant strengthening factor in the online rapid-induction heat process. The proposed novel online rapid-induction heat treatment provides a promising pathway for the mechanical property improvement of the spring steel. Graphical AbstractKeywords
This publication has 40 references indexed in Scilit:
- Neutron diffraction in situ monitoring of the dislocation density during martensitic transformation in a stainless steelScripta Materialia, 2013
- Thermomechanical warm forging of Ti–V, Ti–Nb, and Ti–B microalloyed medium carbon steelsMaterials Science and Engineering: A, 2013
- Understanding the mechanical properties of vanadium carbides: Nano-indentation measurement and first-principles calculationsJournal of Alloys and Compounds, 2013
- Design of high-strength steels by microalloying and thermomechanical treatmentMaterials Science and Engineering: A, 2007
- Effect of block size on the strength of lath martensite in low carbon steelsMaterials Science and Engineering: A, 2006
- Refinement of grain boundary carbides in a Si–Cr spring steel by thermomechanical treatmentMaterials Science and Engineering: A, 2006
- Transition between low and high angle grain boundariesActa Materialia, 2005
- Effect of controlled rolling and cooling on the microstructure and mechanical properties of 60Si2MnA spring steel rodJournal of Materials Processing Technology, 2005
- Effect of nitrogen and carbon on the early stage of austenite recrystallisation in iron–niobium alloysMaterials Science and Engineering: A, 2002
- Advances in Physical Metallurgy and Processing of Steels. The Limits of Strength and Toughness in Steel.ISIJ International, 2001