Forming Process Prediction Model and Application of Laser Cladding for Remanufactured Screw Pump Rotors
Open Access
Abstract
In order to achieve high-quality repair of complex curved parts, a remanufacturing process method utilizing laser cladding and reverse engineering technology is proposed to be implemented by robots. This study focuses on the oscillating helical surface of a screw pump rotor. A single-pass laser cladding test is conducted using Response Surface Methodology (RSM) to construct a predictive model and identify optimal process parameters. The model’s accuracy is validated through analysis of variance (ANOVA) and index verification, while the optimal lap rate is determined through multi-pass laser cladding testing. Using reverse engineering technology, the generation of laser cladding paths for complex surfaces is explored, and the trajectory planning for the laser cladding robot is carried out. Simulations and experiments of robotic laser cladding on complex surfaces are performed, with the optimal process parameters guiding both the experiment and simulation. The optimum single-pass cladding layer, with a lap rate of 25.6%, is achieved when the laser power is 2217 W, the powder feed rate is 2.86 r/min, and the scanning speed is 400 mm/min. The study successfully plans the path for laser cladding on complex curved parts, verifying its feasibility and effectiveness, verifying that there is good metallurgical bonding between the cladding layer and the substrate, and helping to select the appropriate process parameters that are consistent with the requirements of a particular application, thus providing valuable guidance for the remanufacture of failed metal parts.Keywords
Funding Information
- China Postdoctoral Science Foundation (2024M754172, 52405614, 2023YFE0209900, 52374383, RG 78/24)
- National Natural Science Foundation of China (2024M754172, 52405614, 2023YFE0209900, 52374383, RG 78/24)
- National Key Research and Development Program of China (2024M754172, 52405614, 2023YFE0209900, 52374383, RG 78/24)
- National Natural Science Foundation of China (2024M754172, 52405614, 2023YFE0209900, 52374383, RG 78/24)
- NTU Putian University Project (Xiao Zhongming) of Nanyang Technological University (2024M754172, 52405614, 2023YFE0209900, 52374383, RG 78/24)
- MOE AcRF Tier 1 of Singapore (2024M754172, 52405614, 2023YFE0209900, 52374383, RG 78/24)
This publication has 34 references indexed in Scilit:
- Laser cladding path planning for gear repair based on area division and trajectory correctionThe International Journal of Advanced Manufacturing Technology, 2024
- Effect of laser process parameters on the dilution, microstructure, and wear behaviour of Tribaloy™ T800 cladding on AISI 316 stainless steelJournal of Materials Science, 2024
- Repair of tungsten heavy alloy die casting molds with laser cladded CoCrFeNiWx high entropy alloy Coatings: Microstructure, wear properties and tempering stabilityEngineering Failure Analysis, 2024
- A Path Planning Method for Polishing Thermal Barrier Coatings on the Surface of Aero-Engine Blades Based on Point Cloud SlicingJournal of Thermal Spray Technology, 2024
- Effects of process parameters on selective laser melting of Ti6Al4V-ELI alloy and parameter optimization via response surface methodMaterials Science and Engineering: A, 2023
- Optimization of single-pass geometric characteristics of IN718 by fiber laser via linear regression and response surface methodologyJournal of Materials Research and Technology, 2023
- On the formation of “Fish-scale” morphology with curved grain interfacial microstructures during selective laser melting of dissimilar alloysActa Materialia, 2021
- Optimization of several surface treatment processes for alleviating fretting damage of a locking pinFriction, 2021
- Microstructure evolution and wear behavior of titanium alloy under cryogenic dry sliding wear conditionMaterials Characterization, 2020
- Geometry and dilution rate analysis and prediction of laser claddingThe International Journal of Advanced Manufacturing Technology, 2019